I feel this thread was "hijacked" by a discussion on RFI. A discussion on RFI would be interesting to many HAMs, but please do it in a separate thread. Let's get back to the proposal of simplifying

The first day I wanted to use a different configuration, I was baffled by the "Clone" thing also .... now I would use nothing else! Once you do it, it becomes fairly obvious... With the menus

I thought I tried that but when so tried to use it I got the fault as at install. What is the difference between clone and clone into? When I clone it seems to make a copy of something in the list

Settings/Configuration. Clone the working settings and name them to your choice. Save them and you can choose to go back to them later. Bill, W4WNT

Exactly what do I do to save the current configuration of WSJTX after I get all settings the way I want them to be? I want to end with to copies of the current settings that I could switch to and have

Here goes, running the following: - Win10 Home v1909 - WSJT-X v2.1.1 - OmniRig v1.19 - IC-7000 with a SignaLink USB and RTS USB for CAT When configuring for the Radio Tab, Rig = IC7100 and Cat Control

By the way Bill, having re-started wsjtx, the program failed again with an identical error eight minutes later. I rebooted the system and restarted gqrx and wsjtx. It is 00:41 now, so I will go to

Right Bill, Good morning. We have some progress. I woke up in an armchair last night and checked and wsjtx had done its stopping thing and the terminal window it was started from has a clue:

Are there any users of these rigs out there that would be available for some testing? I need to be sure of the antenna selection format for these rigs... The question would be can you select the

i'd say that the clone config is not really so much a "Backup" as it is a copy to make it easier to use multiple similar radios, you gt your settings the way you want for th first radio, clone the

I have observed the same problem of occasional skipped sequences, sometimes worse than others. WSJT-X > DXLabs > JTAlert Intel Core I5 with 8 gB RAM, Win10 Pro. Sometimes it will alternate sequences

My methods resolved all of the issues of concern while your peer reviewed methods did not.    I'll take 100% success over mostly failure methods observed.  Sorry Jim, I don't find your work

Gil, I don't understand your confusion, the location of the WSJT-X settings file is specified in the WSJT-X User

I believe the setting are saved in WSJT-X.ini in the same directory as the .log & .adi files AL, K0VM On 1/22/2020 10:21 AM, Gilbert Baron wrote:

If you monitor total CPU load in windows Resource monitor, you may notice that there is a peak in CPU loading at the end of each decode cycle in which decodes did not fail. If the cppu

This is bad advice, based on wandering around in the dark. See http://k9yc.com/KillingReceiveNoise.pdf and http://k9yc.com/RFI-Ham.pdf which are based on extensive, peer-reviewed research. 73, Jim

I have messed up SO MANY times with configurations. After spending hours getting it the way I want IU try to make a backup of current settings. All my other windows programs work by Select a

GM I find I need all of the vertical space for stations calling me. Having the waterfall on a second monitor frees up space for the WSJT-X and JTAlert windows. Once the windows are arranged to your

I have the same problem with occasionally dropped decode cycles. I'm use the internal audio drivers in my Icom ic-7300, and the receive level is always on abt 60 db. I have no problem with non-synced

I am using some #31 material doughnuts which are 1.25"D x 0.25" H  with an ID of 0.625".  That 5/8" ID is just large enough for a USB connector to pass through allowing me to make a couple of turns