I forgot about the PSK Reporter feed ... not sure if that's a primary feed there for the WSJT-X modes. Neil, KN3ILZ On 1/16/2020 6:23 PM, Chuck Reti WV8A via Groups.Io

My only "reporting" is to PSKReporter directly from WSJT-X, and I've always seen that reflected on HamSpots. Chuck WV8A

Hi, The FT847 is a strange radio. Connecting an FC20 Auto tuner disables the RS232 port without any warning! There is no indication of this on the display, no LED, nothing at all. Yes, there is a

Greg, I am usually driving my TS590 through the HRD cat interface of WSJT-X. But the HRD interface gets confused with the TRX hardware split between 1840 and 1908 (software split of WSJT-X is to be

FWIW .. if you're using JT-Alert the Decodes History Windows will give you that information, along with all the decodes for your current session. Neil, KN3ILZ On

I have a script that runs independently of WSJT-X and shows the last 5 calls logged. You will need to install Cygwin for it to run though because tail is not a windows app by default. Cygwin is free

Greg, You should be able to add that frequency to the list of allowed frequencies. Bill WB6JJJ

Hello Zeev OK, I am still in the dark how one would access the output of the WSJT-X to add your code ! I will leave well enough alone and be happy to use all of the SW as-is. Thank you for the quick

I certainly second this opinion. Thanks to Zeev for given us the additional script to complete the option made (partially) available as indicated in the FT8 + Operating guide. The process works

Go into the WSJT SETUP menu and select the Frequencies tab. Then on the table Right-click and select Insert. Put 1.908 in the box and click. OK. Then back to the WSJT screen and select that

Hello Dick, I do not believe that one can mix a PowerShell script with the WSJT-X code. The script works independently of WSJT-X by scanning one of its output files.

Its not surprising that you see the same issue on the clone, as it uses much of the same code base. This has been reported previously, I know I've been Bill comment that it

I am running a flex6700 with a beko power amp on 2m directly. My new microham peak power meter is showing a power output spike occurring with WJST -X JT65b just at the beginning of the transmit

@ Reino, I see no reset/release option that you make note of. When I right click when moused over the Band Activity and select Erase it does bring the display back to life, but that should not behave

Some versions of windows will change the windows default sound device to the last sound device plugged in/added. Additionally, the default sound device may be reset when windows does a

Windows may have set it as default. As someone else has said, if you have CAT control, you may want to use that instead of VOX. Allow the CAT control to trigger the Tx.

David, Don't forget the "panic" shortcut key: ESC will stop TX, abort QSO, clear next-call queue. See 10.1.9 in the User Guide. Cheers, Kai, KE4PT On 1/15/2020 18:25, D

I use the Ci-v cable for FSK RTTY and to run CW Skimmer in N1MM+. I agree that John should be able to get everything to work together, but if in fact, he finds that he "needs" an extra Com port, I'd

Ed, There is a ”feature” in the program that causes those symptoms your described. The display reset releases/cleans the overrun space and display should start show decodes as usual. Just try it.

Dave/Reino, Thanks for the replies. @ Dave, I'm on 40M and on any given interval, I get some CQs, even if there weren't any CQs in a given interval, that "Band Activity" window should not remain