Dave/Reino, Thanks for the replies. @ Dave, I'm on 40M and on any given interval, I get some CQs, even if there weren't any CQs in a given interval, that "Band Activity" window should not remain

Just an FYI Jacques. If you use JTAlerts, you can try the "Decodes History Window". It's in the "View" menu or press F9. Works nicely. 73. Carl - WC4H

Trying configure my setup for correct split ops on 160m to work JAs at 1908 and am not having any luck. Have posted this on the FB group - had some suggestions that do not work for me yet I know it

Make sure your PC sound card is the system default, NOT the Signalink. Also ensure only your digital mode software is set to use the Signalink. Other apps may be set incorrectly. Run a PTT line and

Band activity window ”overruns” after a certain amount of messages. Try to right-click on it and Reset. You may also use Erase button and double click it. 73, Reino oh3mA

I am using a Signalink, that is what is so puzzling. Thanks KEØIOU David On Thursday, January 16, 2020, 04:59:51 AM CST, <groups@...>

It is also better not to use VOX on the rig but control the Tx from WSJTX.

This is why it is better for some people to use a separate sound card device like a Signalink to operate digital modes, especially for people who use their computer for many other uses. We all have

uncheck the 'cq only' button. perhaps content currently has no cq's in it Dave Garber VE3WEJ / VE3IE

Rick, Hamspots receives spots from JT-Alert and not WSJT-X, so the Hamapps group would be a better place to get support. That said, run the connection test in the JT-Alert settings to

What happened was that you have WSJT-X using the same soundcard as the computer does for sounds. We hear this happening all the time with computer 'dings' and even movie soundtracks being

I have logged into this site before and it has always shown Calls, etc in "N8XI : Calls You Spotted" But it has been blank ever since logging in tonight. https://hamspots.net/myspots/ The

I picked up a new (to me) computer today and had some trouble getting WSJT to transmit. I finally figured out the volume was turned off. Once I turned it on it worked. HOWEVER... when I tried to

Hello Zeev I am not at all versed in modifying existing software like WSJT-X and using POWERSHELL. Is the material here ===> https://www.computerperformance.co.uk/windows-7/powershell-2/ what I

Bill/All, Win10 platform running WSJTX v2.1.1 and just started using the "Dark Mode" command line per Bill's guidance to invoke dark mode effective 1/13/20. Not sure if it is related, but on or abouts

Just change the extension to adif. The files are the same. George J Molnar, KF2T Arlington, Virginia, USA

Hi John, Icom IC-7300 and all active at the same time. Make the contact in wsjtx and the log is updated there and in ACLog through JTAlert. Bill

Thank you again Michael for your thoughts. The audio and serial communication are completely separate from each other and the presence or absence of audio signal should not affect the serial port.

Well, that's interesting. You say the TEST CAT button turns green and the TEST PTT turns red (should be a toggle on/toggle off). Both these indicate you have good serial communication with the radio,