Dave, Thanks for your comments. With the FT-736, my initial concern is to use the Echo mode for testing the EME system. I expect that the oscillator drift will not be critical for the echoes. But I

I suggest you don’t ever do a full reset on a K3 without having a copy of the (hopefully vanilla) settings file. There are many things that are set up at the Elecraft factory to configure the radio.

Thanks for posting this info, Bill! MUCH easier on my eyes. 73 de Gary - W9BS

I also have a FT736r. Nice radio, even now, but... You will need to do something to prevent the 20.48MHz reference oscillator drifting with temperature (even the TCXO drifts!)  It's "OK"(ish) for

Hi Gil. So, there is no problem now? 73. Dave G0WBX. (Sounds like 40m is open to India from the UK, @ 23:49 UTC.) -- Created on and sent from a Unix like PC running and using free and open

in settings somewhere, set cat to data or none, not rig. rig may be causing radio to go to lsb, and should not be. ( based on bandplan) Dave Garber VE3WEJ / VE3IE

Hi Bill, the adduser command fixed the WSJT-X problem and Test PTT now works. Clearly I didn't have the rights to access the serial port. However, the computer still doesn't key the FT-101E, so at

On 11.1.2020 23.22, W7VH wrote: Jon, N Avg on Wide Graph. 1 is as fast as it will go, bigger numbers = slower. 'Kari, oh2gqc

Jon, I the Waterfall display with controls active you see lower left N Avg n, with the arrows you can set average values and those do define speed of the waterfall display. It is a stepwise setting

Hi everybody, Does anyone know how to increase the speed of the waterfall display? I haven't been able to find such a setting. Thanks, Jon W7VH

Rich VE3KI nailed it! The digital setting was something other than Data A (cannot remember which). I now regret not doing a full reset on my K3s when I first got it from the person I bought it

Hi Rich, Good point. I will check these settings in Data Mode on the K3s. Data mode should be USB already but your suggestion #1 and #2 may be the issue. I bought the radio used and the previous owner

Randy, To me this sounds like some band-specific setting within the radio. My old ICOM 746 "remembers" which antenna (1 or 2) I last selected for each band, and WSJT-X doesn't control that. Could it

On 11/01/2020 01:18, K5TCJ wrote: Hi Tim, if we removed old uninstall entries you could not easily install multiple versions of WSJT-X. The redundant uninstaller entries in

Hi George, i/o error means the port you specified does not exist, or something else has access, or you do not have rights to access it. Have you added your user to the dialout group? sudo adduser

Hi Ed, yes, start WSJT-X with the following command line: wsjtx -stylesheet :/qdarkstyle/style.qss 73 Bill G4WJS.

Make sure that the Power Slider at lower right is set to 100%. Each band retains its own settings.

Three possibilities: 1. Is the radio in a different data sub-mode on 80m from the other bands? It should be in DATA A on all bands. 2. Is the radio on the correct sideband, or is it perhaps in DATA

I'd like to make WSJT-X v2.1.1.operate with the Dark Theme or Dark Mode. I went into the Settings --> Personalization --> Colors --> Choose your color "Custom" and selected "Dark" for Choose your

I am new to WSJT-X and just getting it running on an Ubuntu laptop into an FT-101E. It seems to work and I have had a few QSOs on 20 meters. My question is how do I set up the PTT functions in the