Hi everybody, Does anyone know how to increase the speed of the waterfall display? I haven't been able to find such a setting. Thanks, Jon W7VH

Rich VE3KI nailed it! The digital setting was something other than Data A (cannot remember which). I now regret not doing a full reset on my K3s when I first got it from the person I bought it

Hi Rich, Good point. I will check these settings in Data Mode on the K3s. Data mode should be USB already but your suggestion #1 and #2 may be the issue. I bought the radio used and the previous owner

Randy, To me this sounds like some band-specific setting within the radio. My old ICOM 746 "remembers" which antenna (1 or 2) I last selected for each band, and WSJT-X doesn't control that. Could it

On 11/01/2020 01:18, K5TCJ wrote: Hi Tim, if we removed old uninstall entries you could not easily install multiple versions of WSJT-X. The redundant uninstaller entries in

Hi George, i/o error means the port you specified does not exist, or something else has access, or you do not have rights to access it. Have you added your user to the dialout group? sudo adduser

Hi Ed, yes, start WSJT-X with the following command line: wsjtx -stylesheet :/qdarkstyle/style.qss 73 Bill G4WJS.

Make sure that the Power Slider at lower right is set to 100%. Each band retains its own settings.

Three possibilities: 1. Is the radio in a different data sub-mode on 80m from the other bands? It should be in DATA A on all bands. 2. Is the radio on the correct sideband, or is it perhaps in DATA

I'd like to make WSJT-X v2.1.1.operate with the Dark Theme or Dark Mode. I went into the Settings --> Personalization --> Colors --> Choose your color "Custom" and selected "Dark" for Choose your

I am new to WSJT-X and just getting it running on an Ubuntu laptop into an FT-101E. It seems to work and I have had a few QSOs on 20 meters. My question is how do I set up the PTT functions in the

While doing a clean-up of unused apps, I noticed that the uninstaller utility said there were like 5-6 older versions of WSJT still installed. When updating WSJT shouldn’t references to older

Hi, Make sure you are in Upper Sideband. John, kc2rxs

No, I was wrong. I just checked again since that sounded strange. It does set it to USB in all and that incudes 80. Even if I had it set to LSB it changes to USB when I change to the 80M frequency,

I do not think that is the answer. WSJTX sets my TS590 to LSB on 80 Mtr and decode works fine. I was a bit surprised at that too since it sets it to USB on all of the other bands , including 40

I do not see how this would help much. If at start timeis tells you that you are too far off you still have to fix it. I have used dimension 4 and cannot remember the last time any of 3 computers were

Make sure your radio is set to USB on all bands for FT8 and other JT modes. 73. Dave G0WBX. -- Created on and sent from a Unix like PC running and using free and open source software:

This is such a common problem... I wonder whether the maintainers of https://time.is would permit WSJT-X to make use of their API, so that on startup, and periodically thereafter, WSJT-X could show

Hi Clarence, you need the fftw3 development package as well as the library package. 73 Bill G4WJS.

Checked the PC time and it is only 0.2 sec ahead. On 1/10/2020 5:20 PM, neil_zampella wrote: