Thanks, Dave but guess I wasn't clear. I was thinking JS8CALL. Print is just too small. Thanks again and 73, de Phil, n6qca On Thursday,

I've found that Windows time system is not adequately accurate nor reliable enough for WSJT-X and other time demanding modes. There are several time applications that will keep your

I don't advise using MIC + LIN because during transmit, anything picked up by the mike will also be transmitted. This would then be voice transmitted in the non-voice band allocations.

Bill, Thanks for the feedback! I don't need to switch other devices, but I can see how the DTR or RTS method could be used to trigger a sequencer. John W2HUV

John, that is only true if you do not need to switch other devices. A common setup is to use RTS to drive an external sequencer that ensures LNAs are taken out of circuit, PAs keyed, then the rig is

If you're using JT-Alert it does that with one click. Neil, KN3iLZ On 1/9/2020 2:06 PM, Bill wrote:

personally I'd like better control over ALL the colors, I.E. the foreground and background of the program windows, program text, along with the message windows. Seannon AG0NY -- “It is a simple

The time was off 5+ seconds, for some reason my clock sync software was turned off. Been running WSJT software since 2006 and that is the first time I had the problem. Thanks and 73, Wes WA5TKU

Tom, I always use the USB mode. John W2HUV

Yep. Always give the benefit of the doubt to Elecraft with the little details like muting the front mic when in a Data mode :) Thanks, Tom NY4I

The mic input is muted during TX. BTW, you should always select the CAT PTT Method because it eliminates the need for a separate DTR or RTS input. RX audio will trip VOX if you have the volume up to

Replying to the suggestion to change station reply activation to a single click. Windows allows you to slow the double-click speed WAY DOWN so it's really two well-separated single clicks. This

File > Settings > General > Font Button 73’s Dave KA3PMW

Yes. A subsequent email I explained it was the signal report that was not being sent over. Tom

Hasanyone implemented this neat idea described in the FT8+ Operating Guide byZL2IFB (ref:page 39 in the latest publication release 2.27). Followinginstructions, the 3 last QSO’s logged appear in a

Great info for ft8.....How about js8call. Is there a way to increase the font size. I looked but couldn't find it. Thanks, Phil n6qca On

Hi Bill, Another "fix" is to go with something like a Kensington Slimblade trackball.  It is pretty expensive, but has 4 programmable click-switches.  One of mine is set to automatically produce a

did you enter it on the advanced page ( where the fox and hound settings are?? put a check where it says rtty ru, and enter FL in empty box beside it? Dave Garber VE3WEJ / VE3IE

File, Settings, Decoded Text Font, select Font, Font Style, Size. On 1/9/20 1:05 PM, Phil Baird via Groups.Io wrote: -- Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966

How does one INCREASE the font for old eyes? de Phil, n6qca, in Prescott, AZ