Louis, you are incorrect, you could verify that by a simple test. The visibility of the Wide Graph window is not relevant here but the frequency span set on it is absolutely relevant. WSJT-X only

John, You can select Configurations > Default > Clone and create another radio by changing the clones setting to what you need. I do this for my Kenwood TS-590S and my TS-590SG and can toggle

This does not happen when I am using WSJT-X 2.1.2, I do not even have to have the waterfall running and I am still decoding signals. The waterfall is just an operator visual aid and has no

completely false from my observation. You do not even have to have the waterfall on to decode signals. Not quite sure what you are doing there.

John, You can select Configurations > Default > Clone and create another radio by changing the clones setting to what you need. I do this for my Kenwood TS-590S and my TS-590SG and can toggle

I seem to recall that V2.1.2 has a tighter time accuracy requirement. Although I would think a time error would apply across the audio spectrum. You may be "hearing" signals but what

We (the contest committee) are looking for photos from anyone who took part in the inaugural World Wide Digi DX Contest that took place in August 2019. We are mainly looking for photos of you or your

Steve, I agree that generally your cannot be absolutely sure, if no 73 to your RR73. On the other hand, if you see (decode) all messages from that station to whom you sent RR73 and there is no sending

That's true Reino. A QSL is valid without the final acknowledgement, since callsigns and some additional information have been confirmed by that point. But you can't be sure until you receive a QSL

Tom, WSJT-X decodes only frequencies that are shown on the Waterfall. The feature may be used to kill unwanted stations or make decoding faster for the wanted stations. 73, Reino oh3mA

Solved it! It was a stupid thing. i just needed to drag the waterfall window out to its full width. The radio could hear the signals, but if they weren’t in the waterfall, WSJT ignored them for

Hi Jim, On the other hand Joe has defined that sending an RR73 means that the QSO is logged. It also means 'I am not expecting any more messages from you, except a repetition of your previous R....,

Correct Sent from my iPhone

1 Google search: https://www.k0pir.us/two-instances-of-wsjt-x-running-simultaneously-with-two-radios-two-antennas/ Good luck Randy N1KWF -- Randy Lake N1KWF 73 Gunn Rd. Keene,NH

Hi, can I download a second WSJTX to run with other radio, so I don't have to change setting each time? Thanks 73 John W9PRM -- EMAIL: john@... WEBPAGE: http://www.w9rpm.com/ DX CLUB:

Ahh, yeah - I thought of Fox mode, but that only decodes messages directed to your callsign ... but I forgot that there's also a "Rx All Freqs" option in Hound mode - disabling that would cause the

Or do you somehow have Fox/Hounds mode turned on? 73, Rich VE3KI

I'll have to check that and let you know tomorrow.

Do you see the strong signals above 1100Hz on the waterfall/scope in the "Wide Graph" window? 73, ~iain / N6ML

Interesting. My problem is worse. I am decoding everything, even very weak. Nobody seems to decode me on 40 and 30 when I decode weaker than say - 16 or so. I guess I need a better antenna {not