I have my udp message rebrodcasting via Jtalert, on port 2238 to a raspberry pi, running Gridtracker, and wsjt stays on 2237 to jtalert not sure if you are running jt alert. but also you must change

Operating System: Windows 7 (64 bit), WSJTX: 2.1.0 24fcd1, alternate layout; Flex 6600. On a "good day" I am able to start multiple instances of WSJTX for multiple slices on the Flex and everything

On Thu, Sep 19, 2019 at 03:37 PM, Bill Somerville wrote: BillHello Bill, For now it's more clearly. Thank you for your explanation. Roman

Hi Roman, you have  misunderstood the basic architecture of the WSJT-X UDP message protocol, WSJT-X is the client and other applications are servers. WSJT-X expects to connect to a UDP server

WSJT-2.1.0 Settings like on screenshot Why UDP server doesn't start ?

did you recently change screen settings. I moved my monitors, and some programs were still trying to go to the old location... Dave Garber VE3WEJ / VE3IE

https://contests.arrl.org/ContestResults/2019/RTTY-RU-2019-FinalFullResults.pdf -- Jeff Stai ~ WK6I ~ wk6i.jeff@... RTTY op at W7RN Twisted Oak Winery ~ http://www.twistedoak.com/

w10, 64-bit

Hi Brad, are you running on Windows and if so are you using the 32-bit build of WSJT-X or the 64-bit build of WSJT-X? 73 Bill G4WJS.

Hi Bill, PTT is CAT

On 16/09/2019 19:16, Bradford J. Williams - N8GLS wrote: Hi Brad, which option do you have selected for the WSJT-X "Settings->Radio->PTT Method" panel? 73 Bill

If you have any solution, I' am also interested. Had this problem with my IC-775DSP when turned FAKE on, not each transmission, but very often.So tuned FAKE off...... IC-765 as second TRX on same PC

Mike, Thanks for the offer....I can do morning(s). I was in "fake it" mode on the 7300 so changed to "split" and frequency hop still occurs but vastly different; (1) WSJT-X freq display on 50.313000,

Sounds like you have "Fake It" checked in the Radio configuration? Might be a timing problem in hamlib. I'll send you a private email and see if we can debug it. de Mike W9MDB

Reviewed again all the settings for the 7300, everything was set correctly. Then was hitting the Tune button and noticed the WSJT-X frequency displayed of the rig would change immediately. Starting

Attempted an FT8 run in this past weekends VHF Contest and had repeated frequency issues on 6m during exchanges. Here is what I had in one instance in the Rx Frequency window during one exchange; UTC

@Scott Ruff I'm not a Linux expert, but with "monkey see, monkey do" I came to the following: Assume you installed Debian Buster already. If not, take the ISO from here:

Hi Bill, I think I found 1 of my "problems". I've been using DX Lab Suite Commander as my rig. That was needed for FT-8, but I don't think it's best for WSPR. I've changed the rig to Elecraft

Not suffering the issue where Windows Explorer gobbles CPU if there are any dead/broken shortcuts on the system?

Waterfall just appeared. It was somehow collapsed to a very narrow slice at the far edge of the screen. I was finally able to catch the edge of it with the cursor and expand it enough to move it out