I down loaded the new release today. Running WIndows 10 on both computers. The new release worked on one computer but not my other computer. Any ideas ?? Thanks in advance for the help. -- *73'S DAVE

I just installed the new version on one computer and works and loads just fine. Tried to down load on the other computer and the new release would not run. Any ideas ?? Tnx -- *73'S DAVE NU4N*

I have two set ups; two computers and two radios. Both computers are running Win10 64 bit, one is a laptop and one is a tower. Radios are a Kenwood TS-2000 used with the laptop and the tower has an

UPDATE: Ok, so I worked a QSO with a local ham friend. It started again, with a TX6 "CQ RU.." The QSO went as a standard QSO, meaning NOT with AZ (the FT RU exchange), but with the std. grid

I have the same rig Jim has, Drake TR7,  and used it for Fox/Hound too before I started using my IC-7300 and TS-590SG. I mostly use my TS-590SG now. 73 Stan KM4HQE

Found a bug in the FT RU mode... Running Win10, and new -rc5 beta (Q. why are hashtags for beta and bug no longer there?) I went into rc5 to take a couple of snips to show my local folks of how to

Hi Martin, I worked on the frequencies table for RC5. I'm glad you were taking advantage of the tables, I'll be interested to see other comments that get added to this thread. With the new

Yes, if I knew where to find the FM I would have R it. Thankfully, Thomas, SM0KBD was kind enough to post the URL. …doug, K6DRK

No Gary. These were actual Fox/Hound contacts on FH frequencies. I've been doing this for a while. 73 -Jim NU0C "Gary - AG0N" <wb0kkm@...> wrote:

Those are likely MSHV contact, not F/H. Split operation is a requirement of F/H to work. Gary - AG0N

I don't know if anything has changed recently but I have made many fox contacts on a radio that does not have CAT at all. The program auto-QSYed the audio down as advertised and it worked

Gerry, Fox/Hound mode requires that your transmit frequency start above 1000 Hz. Then when the Fox calls you, the program will move you to a lower frequency, on or near his. If you have your setting

Mike, Quick question for you... When WSJT-X is installed, does it also install whatever hamlib was available when it was compiled for Windows? 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL

I’m trying to install WSJT-X on a Raspberry Pi 3 by following the KM4ACK video on YouTube. I have one error I can’t resolve (fingers crossed it’s the last one!) The install package is

Need help here. I set up my K4 for FT8 per excellent instructions and it works fine. The settings require My question/problem is running fox hound. When I try to run F/H, WSJT-X prompts me

New link for 64-bit Hamlib https://www.dropbox.com/s/snmkzu8eif89yqs/libhamlib-4.dll?dl=0 Mike W9MDB

Running v2.6.0-rc5 on a 64-bit Win 10 (21H2) PC, 3.0GHz i7-9700 CPU and 16G RAM. Issue with the frequency/mode table when using certain configurations under v2.6.0-rc5. I have multiple WSJT-X

Most recent 64-bit hamlib -- 32-bit will be available overnight at https://n0nb.users.sourceforge.net/ dated 20221201 This version as of today fixes a serial slow down problem.  Everybody please

They have updated a version for flex6xxx on the website correcting the issue.

Dare I say it? RTFM. ;o) Gary - AG0N