You are not running WSJT-X as 'root', are you? How are you uploading to QRZ? 73's de Kari, oh2gqc

Is it a combination between step of 500 Hz and the fine tune between the two limits? Pietro See User Guide 4.2. Radio and Split Operation bullet point or simply there are two frequencies that define

Start by downloading 2.5.4 from k1jt website.... sent by ve3wej on lg phone

Alex, I just got my Quadra Plus and looking for some help in finding a way to get WSJT-X on to it - SD Card or ? Any help, pointers (which release) would be appreciated! Terry, ve3ega

I am going with the Bermuda Triangle (Just watched the first two episodes of 1899). Seriously, have you thought about temporal propagation changes in the ionosphere? 73 Bob

Is your time within a second of realtime as seen at https://time.is ? 73, Willie N1JBJ

Suddenly losing the other party while having QSO. Calling calling calling. Band activity is mostly normal. But there is sometime just nothing. If I turn the volume of my IC-7300, I can hear the

Last night 30 meter worked well. Tonight not. The setup is the same. Change the input volume. Nothing. If there is problem with communicating with the rig, why only sometimes on 30 m or 40 m? And

Something is wrong. If the output is between 1500 e 2000 Hz it cannit drive from 0 to 3000 Hz. Is it a combination between step of 500 Hz and the fine tune between the two limits? Pietro (via

Wrong. The frequency should be between 1500 and 2000, not locked on 1500. It goes where you put the RED “goal posts”. Gary - AG0N

Here are some vetted settings for the IC-7300 For the TX side set the rig at 50W, WSJT-X Pwr slider at -3dB and adjust the ACC Mod Level to get 25W during transmit.Then you can crank up the WSJT-X Pwr

That's completely different for a transverter setup -- You want to use Split=None and avoid the band edges. As you found sounds like it somewhere like a 2500Hz bandpass. If you RX on the transmit side

Perfectly normal! You have split set to NONE! You must use CAT control for the appropriate shift to work. Use RIG or FAKE IT for split and make sure your CAT control is working properly. Gary -

Pietro, The red goal post and the Tx spinner tells the actual transmit frequency and it really changes for FT8. For some modes 1500 Hz is a default frequency, but you may change it by moving the red

I'm using Win 10, WSJT-X 2.5.4, and HRD Logbook 6.8.0.340. After the QSO has completed (I sent my 73) and the Log QSO window pops up, I make sure all the appropriate fields are filled in, I click on

You need to use Rig Split or Fake It and then you can transmit anywhere. Mike W9MDB

What you mean it's not accessible? Perhaps you should create a hard link to the file on your desktop to make things easier. cd /home/[username]/Desktop ln wsjtx_log.adi

Why are you limiting yourself to 10W?  Rig limit?You'd get more than 9dB on your transmit going to 100W. Mike W9MDB

Checking PSKReporter you do seem to be receiving Europe pretty well but not transmitting very well. What antenna are you using?  And what power level?  What rig do you have? Mike W9MDB

There are no absolutes here -- for example, the IC7300 can put out 100W with no ALC showing at all.  Some rigs will show ALC when at full power.  I have worked with rigs that cannot do full power