Thanks Reino. I'm using a FT818, without split. I had understood that in this condition the output is always 1500 Hz, I'm wrong? If true can't be the audio passband to cut the audio. And I can't see

Hi Pietro You don't tell what rig you are using as the exciter. In most of modern rig the TX filter cut off power around that audio frequency for normal settings of the rig. You could use Split

Was the first thing I thought about. But the output of wsjt (I understand...) is always 1500 Hz and the split moves the RF to create the right output. So in my station the output frequency doesn't

Hi Ray, You've gotten me real confused here. I'm using an Icom 7300. So, if this is not one of the 'late models' then disregard the rest of this message. On my radio the power setting is in about

Pietro, What do you have the TX bandpass filter set for? If the upper setting is lower than 2700 then you are either on the edge or totally out of the upper limit passband. Try adjusting the TX

If you want to simply read it I think that a soft link will do the job. pietro I2OIM verizon.net@groups.io> ha scritto:

v2.6 rc4 If I put the tx frequency higher than ~2700Hz I have no audio output. I'm using split = none, data/pkt mode; the output frequency is under my control (i'm working on QO-100 with separate

I am using wsjt-x (latest version) in Mint Linux. Works beautifully. However, when I go to upload the .ADI file to QRZ, it's not accessible. I have to use file manager to navigate to

you should also be able to remove via task manager ( jt9) and restart wsjtx. Dave Garber VE3WEJ / VE3IE

Oh yes Windows 11 64 WSJT-x 2.6.0-rc4 c35798 I had to turn computer off and back on to get it to come back on. Scotty W7PSK

Had just been doing some 15m work on FT8, when I suddenly notice an Un-commanded shut down with 2 errors. Tried to restart and received the same 2 errors. Sub process error: Failed to close orphaned

FWIW when I first stated using Wsjt-x/FT8 I had the same opinion. I was only working strong stations. Now I have an antiquated set up but since I got a handle on my output audio it works great.

Hi Bill, Perhaps JTAlert has even that possibility. I am not using it myself. As such a strong reception signal may not mean that the station has a good reception. That station may use very high

Running Windows 10 and never more than 10 watts. Would like to have the option to filter weak signals from the display -- maybe all with negative dB -- because I have never been able to establish

Your terminology needs some clarification. WSJT-X has a "Rig Split" mode -- do you have that turned on? The VFOB frequency and mode will change when you transmit -- not when you change bands or

That doesn’t apply to late model Icom radios. With these radios the ALC does nothing until it reaches the threshold. The threshold is the red area of the meter. The power control does not set power

Another consideration is make sure the processor is not on. Bobby/N4AU -- n4au@... n4au@...

Hi Joe, Which radio you got and how your CAT is connected? Is the CAT driven directly from WSJt-X or do you have another controlling program such as HDR or Flrig? The main issue is whether the TX UP

It might be old age, but no matter how many times I tell myself I won't do it again, it is only a matter of time! It happens more than I wish. My issue is I keep forgetting to shut off my TX UP when

Any portion of time that contains situations where you Tx continues although there is another lucky station, who got an answer. There could be more than one attempt to see tendency more easily,