How often do you see them? Mike W9MDB

No...not referring to "Deep". Referring to "Max Dist" in tab 2 and the "Call 1st" on the main window.  Those two would cause a crash if receiving a TX1 message without a grid. Mike W9MDB

Been using 115,200, Ill try switching it down to see what it does. Oh windows 11  64

I'm trying to connect WSTJ-X to my IC-7610 but am having trouble. I've gone through the settings on both several times to no avail. It seems to be decoding (not on the waterfall though) but having

That bug also occurs with "CQ First" too.  So the fix will be in RC5. So now need to know if anybody is seeing a crash that is NOT using "CQ First" or "CQ Max Dist". Mike W9MDB

Mike, I usually run in the normal mode and have experienced the cash in both FT8 and FT4 but they did not seem to happen until late Oct or early Nov. I am not familiar with “Max distance “ so I

Haven't seen previous responses but you could enter the DXpedition frequency into WSJTX and switch using the software. 73 de G4EST www.g4est.me.uk

Thanks very much Mike. Your suggestion is very much appreciated. I will look into this after I dig out from the recent (and incoming) snowstorm(s). My computer is running 64-bit Windows 10, and I

Thanks for the reply Willie. Just to be clear, you are correct in that I am not transmitting when this occurs, merely rotating the knob on the 7300 while receiving to change from, for example, the

John,  Thank you very much, that did the trick. Everett N4CY

Thanks Joe, I understand. But when I was called by 5V7RU 5 times, I was not picked up from pile up at all. I had no experience in previous ver. of WSJT-X. It worked very well. But by loopback

Hi John, Yes, you are missing a lot! Quite a lot is explained in https://physics.princeton.edu/pulsar/k1jt/FT4_FT8_QEX.pdf . It may be a bit heavy, if you don't have telecommunications background as

There's a check box for controls at the top of the window. -- John P. WA2FZW

Thanks Joe, I understand. But when I was called by 5V7RU 5 times, I was not picked up from pile up at all. I had no experience in previous ver. of WSJT-X. It worked very well. But by loopback test,

I was clicking on the waterfall and the slider adjustment bars disappear that were on the bottom of the waterfall. I have not been able to figure how to get them back. Could someone please help me

Breakdown of the data stream is included in the online user guide and/or the article describing the protocols in QEX by Taylor and Franke. Those "mode" characters are set *by the receiving program*

Hi Joe, W4TV, Am I missing something? Maybe a full breakdown of the actual transmitted transmitted bit stream... that would help. Here IS an actual F/H line from the Am. Samoa station I just

Well first of all tnx for the replies. It is just a old laptop I thought I would get out and play with. I have 2 laptops and one desktop running Windows 10. Just thought I would get it out and play

Well Dan it's still a good little handy laptop. I have 2 laptops and one desktop running Windows 10. Just thought I would play ard with it. Still works great except for the missing dll file. I will

Hi Michael! I have SDR Console synced with my FT-891 and WSJT. Shoot me an email (good on QRZ) and I'll explain and send some screen shots. -- John P. WA2FZW