On 16/08/2019 17:50, Bill Somerville wrote: Hi Brad, there appears to be a few major show stoppers on this. 1) The Omni-Rig v2.0 project appears to have been abandoned,

Hi, I'm running an older version of Mac OS, 10.11.6 'El Capitan', and tried upgrading from WSJT-X 2.0.1 (which works perfectly) to 2.1.0, but the newer version does not start. Looking into this, if

Hi Brad, I can add those but I found when I tried the knock-off 4 rig clone of Omni-Rig that there are some problems with that version. YMMV. 73 Bill G4WJS.

In the next WSJT-X release can OmniRig Radio 3 and OmniRig Radio 4 be added to the Rig list ?? Thanks, 73, Brad N8GLS

Bill, Sorry about the mode omission in my statement... I don't remember trying it on FT4 but for sure it did this on FT8 (as I believe you've confirmed). And thanks. The new modulation method is

On 16/08/2019 10:10, SM4RGD Charlie wrote: Charlie, I did not see a response from you to this message: https://groups.io/g/WSJTX/message/3962 did you reply to Mike off

I not found any solution for this problem. I get back to 2.01 and all work OK. Wait for ur next version hi hi. Best 73 de SM4RGD Den tis 13 aug. 2019 kl 15:57 skrev SM4RGD Charlie via Groups.Io

Hi Hank and Gary, I can confirm this is a defect and I am testing a fix for the next release. 73 Bill G4WJS. On 15/08/2019 15:10, Hank Garretson

Thanks Bill. 73, Hank, W6SX

On 15/08/2019 14:41, Hank Garretson wrote: Thanks Hank, I suspect the issue you are experiencing is related to the way that the Tx signal is generated for the latest GFSK

Ooooops. Sorry. For me, it was FT4 and/or FT8. Contest Exuberantly, Hank, W6SX

It sounds like you have "Default" selected as your sound device in WSJT-X. Whenever you plug in anything (including your rig) Windows makes it the default devices rather than asking you if you want

Hi Gary and Hank, neither of you have said what mode you are using. 73 Bill G4WJS.

ok... we'll try this again ... I know I responded to your first post of this message a few days prior but its now gone! I BELIEVE there is a bug in the software because "Allow TX to change during TX"

"Me too".... I have the same setup and problems. I will try not using HRD and see if it works for a while. Thanks for the information !

I am facing the same problems with power jumps as well as nightmares with the TX audio level, mainly after the latest windows "update". I am using W10 17763.678 , WSJTX 32 bits 2.1 , connected to an

On Sat, Aug 10, 2019 at 5:27 PM Hank Garretson <w6sx@...> wrote: Help please. Maybe I'm losing it or maybe my memory is failing. I'm pretty sure in the past with "Allow TX frequency change while

Yes, but the problem still persists.

Have you excluded %LOCALAPPDATA%\WSJT-X from antivirus/malware ? de Mike W9MDB On Tuesday, August 13, 2019,

Correction. LatencyMon is now reporting "...seems to be having difficulty..."