The only practical way is to stop decoding. I do it frequently. Slow readers (me) will constantly be falling behind on a busy band, so I just stop it, knowing I will lose any incoming while stopped

What frequency is your red post over? In other words, are you trying to transmit something that the rig won’t? Put the red post over someplace mid-scale between 1K and 2K to be sure. Gary -

this email showed a link to a 790a. I have one of those too, so which one do you need help with Dave Garber VE3WEJ / VE3IE

if you mean a 590s/sg, i have a sg model. Dave Garber VE3WEJ / VE3IE yahoo.com@groups.io> wrote:

Nick, I sometimes run up to 65 watts on my FT-991A, but that's the maximum I run. My FT-991A was getting very hot when I'd get a bit long-winded on Feld Hell FSK-105 a.k.a. FM Hell mode which has a

"Brian Morrison" <bdm@...> wrote: But then again: https://github.com/Hamlib/Hamlib/issues/1126 So is it actually the TS-990S which doesn't have a version with the G suffix? -- Brian

"Michael Durkin" <Kc7noa@...> wrote: I think he meant TS-570S(G), the predecessor to the TS-590S(G). -- Brian G8SEZ

I have the FT 897 and it is working fine for me 3000 qso on FT8 Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows Sent: Sunday, October 16, 2022 8:00 AM To:

id guess

https://www.rigpix.com/kenwood/ts790a.htm

Try the latest hamlib New hamlib for installation directions #1 Shut down WSJTX/JTDX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX/JTDX -- hopefully your

"Michael Black via groups.io" <mdblack98@...> wrote: Can't find that model Mike, is it a typo? -- Brian G8SEZ

ello, I have read that the ft-897 is not working with wsjtx .. Even when the uncheck Rx query during Tx is disabled, i still get the dreaded Hamlib error: rig_get_freq(2017): freqMainB=0,

Got it, thanks. It is at 0db

Anybody out there got a TS-970S/SG that would be available to do some testing with me? Seems we're seeing some VFO flashing in the latest hamlib and would like to debug this. Mike W9MDB

Yahoo mail keeps messing up the HTML formatting....so here this is again in plain text. Run "mmsys.cpl" and right-click your rig Playback device and select "Properties". Right-click the Levels

Run "mmsys.cpl" and right-click your rig Playback device and select "Properties".Right-click the Levels slider and choose "dB".Almost all rigs should have this at 0dB.  There are a few

Anybody who writes a manual for a rig in this day and age should be flogged for not showing power limit for ANY mode.Especially FT8 which is by far the most popular mode now.  They could phrase it as

It's not uncommon for manufacturers to recommend derating the power output for FT8 - it is a mode that is quite demanding of the finals. There is probably a fair amount of backside covering involved -

Klaus, I hear you about the bank balance. I use the same bank. Very happy you found a work around. 73 Bob Rose KN6UXD