The Band Activity grid at DXHeat.com shows this at a glance.

Did you install the 64-bit OpenSSL if you are running the 64-bit WSJTX? Mike W9MDB

Hi to Alan, Brian and Kari, That is very interesting! I changed the time update period earlier, and that did seem to make a difference. I think I went from 1 minute to 5 minutes, and noticed it

I followed the instructions in section 3.1 and am still getting the error message. So, now I've installed openSSL and vcredist_x64.exe with the problem still present. Anyone have any other

Many have found that too frequent time sync can cause dropouts as the time is a higher priority that FT8 when it comes to CPU resources. I would think a time sync of NO LESS than 30 minutes would

To clarify a point, Meinbers is nothing more than a compile of "ordinary ntpd on *nix" (which already supported a windows buildP with a windows installer and a few other things added for ease of use.

Phil, from what I've heard, Dimension4 is not very good time sync application. And once a minute could well be way too often too. Have a look at this email by late Bill Somerville, G4WJS:

"Phil Cooper via groups.io" <pcooper@...> wrote: It depends exactly how the clock time is altered, if it makes significant jumps this can cause all sorts of trouble. If it is

Phil, Definitely. Use far less than that, maybe several hours or more unless your PC clock is broken. In fact the proper NTP of Meinberg is recommended. 73 Alan G4ZFQ

I wonder if it could be your Dell? John VE7KKQ

Hi Kari, My PC time is good, as I use Dimension4 to keep it good, and this is updated every minute. Maybe that is too often? Maybe the sync is confusing things? 73 de Phil GU0SUP

Hi Phil, First check that your computer time is accurate. Go to https://time.is/ to check your clock. It shoud report "Your Time is Exact". If not, install some good time scynronization

Hi all, Over the last few days, I have noticed that WSJTx isn't decoding some time slots. This appears to be random. I am using an IC7800 via a microHam MKII to an AMD A8-9600 Radeon R7 with 16GB RAM

David, This is a good idea. I usually visit DXmaps.com to get an idea which bands are active. I am sure there are other websites that can tell you “where the fish are biting.” 73 Bob Rose

Hello Mike, nope. VFO mode. Maybe this is important or not.. When i do the CAT test, the FT857 beeps and transmits for a second. Am 07.10.2022 um 14:59 schrieb Michael Black via groups.io:

If you (Linux) 'tail -f ALL.TXT' it's in there. Windows appears to have PowerShell and other equivalents. 73, Willie N1JBJ

Hi David, No, there  is no such adjustment. If there were, it would be mentioned in the User Guide.... 73's de Kari, oh2gqc

Are you in memory mode? Mike W9MDB

I tend to jump from one band to the other looking for new grids. Sometimes as I am hopping an interesting CQ will pop on my screen but I don't know if it is the new band or the one I just left. Is

Thanks, Dan! Here's a first cut: https://www.dxlabsuite.com/dxlabwiki/WSJTXonMacCommanderonParallels Step 5 of the Configuration section is confusing because its steps a through e don't match