Or their antenna or receiver is not working properly at all, hi! 73, Reino OH3mA

An invitation would be appreciated. Frank KD9ISN

If  it's the same file in dropbox on both machines you don't need to do anything.  The file is updated almost immediately from Dropbox and you should see the notification on the "other" machine when

Ron: Setting the audio level with the receiver connected to a dummy load won't be a realistic scenario because band noise that's received with an antenna connected will almost inevitably be

While I agree that use of AGC reduces the need to ride gain, it does NOT eliminate it in the presence of very strong signals. I use an Elecraft K3 and use slow AGC to minimize its effect on decoding.

Most logging software will allow you to import adif files. If your logging software doesn't allow importing of adif files, you can use the free ADIF Master utility, available at

I have 2 computers running and they are running with Drop Box. How do I merge both files of each computer together? Thanks -- *73'S DAVE NU4N*

Me too. Pietro I2OIM

Hello, time ago I asked if is possible to add PROP_MODE tag and now it's present to have the possibility to log SAT QSO. Now I ask if is possible to add other 2 field, hand editable not need the list,

The waterfall now is working but has stopped and started multi times. Does this indicate an RF interference. Some has told me it was interference at 1270Khz. If so, do I use terroids to quit this

Good Lord, Robert. I was unaware of this pskreporter service. I can’t thank you enough! Robert KN6UXD DM13ld

Not necessarily. My MacBook won’t keep time sync so I use ChronyControl: https://www.whatroute.net/chronycontrol.html

I know that will sound crazy, but if Roger is using a Mac he isn’t using any app for time sync. Bob KB6UXD

Hi Ron, The original recommendation is to set the Receive Audio Level to 30 dB with empty band noise present. Depending on the rig, antenna and band the noise level can be higher than what you will

My apologies, I directed you incorrectly in my earlier post. Clipping occurs when you have your receive audio is set too high. To correct this issue, do the following: Right click speaker icon in

Thanks . That was very good information put in a concise layman’s form. I am going to give those gain settings a go tonight

Hi. Perhaps you can ioen http://time.is an see difference between your time and official time. It may also result from time delta with different time zones, so the shown time seem to be correct, but

I won't define clipping, but you can get the meter out of the red zone by reducing the level of your receive comm port in windows.

I'll apologize if you were offended...not my intent...but I should have phrased that as a question instead.  So mia culpa, wet noodle, and all other modes of abuse accepted. Now that you have it

Tad: If you're operating your rig with AGC off (as suggested in the WSJT-X user guide) then it's possible, or even probable, that the audio output from the rig is becoming distorted when receiving a