main@WSJTX.groups.io

All freq are good

By aa4tn1@... · #38436 ·

Can N3FJP logging software be used for WSJT-X logging? #logging

Can N3FJP logging software be linked into WSJT-X? I think I read somewhere this might be possible, but I don't see in any of the WSJT-X setup tabs any options for doing so. If so, what screen on

By Allan AE2V · #38435 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

What mode are you using when working QO-100 ? ( I have nothing to work with over 30 MHz :( ) 'Kari

By Karza <kari.sillanmaki@...> · #38434 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

The same but I checked the grid, too. I work QO-100 and grid are part of the goal... Pietro (via Tablet)

By Pietro Molina · #38433 ·

Re: FT8 not receiving #FT8

check your ft8 frequencies DAN KC2STA -- Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX

By d_ziolkowski · #38432 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

Hmm, that sounds weird. Is this callsing the only one you are having this issue with? Yes, that's true. And AFAIK that's what always happens. What are your colour settings? Here are mine from top to

By Karza <kari.sillanmaki@...> · #38431 ·

Re: #JT9 Using JT9.EXE #JT9

Here's the .WAV file I can't get JT9.EXE to decode There is one short burst of 2 frames of JT9G-Fast in that 10 second file Andy www.g4jnt.com

By Andy Talbot · #38430 ·

FT8 not receiving #FT8

hi..mike here ( AA4TN )..having problem with recevie on FT8....no activity on band activity and none on gridtracker on all bands. But when i change mode to FT$ all works great on all bands..nothing

By aa4tn1@... · #38429 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

No, Kary, I didn't. I'm sure that the callsign was not in the adi file and btw was the absolutely first Qso with him. Tomorrow I'll perform some test with a dummy installation to investigate... I

By Pietro Molina · #38428 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

Hi Pietro, Correct, WSJT-X will create a new logfile when next QSO is logged. No, only wsjtx_log.adi is scanned by WSJT-X for previous QSOs. Are you perhaps using some 'companion program' in

By Karza <kari.sillanmaki@...> · #38427 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

The colour codes are not in the adif file, they are in the configuration file. The only thing the adif file does is tell the program which callsigns you have worked on which bands and modes. To be

By ve3ki · #38426 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

Yes Kari, I'm sure. v2.5.4 I opened the wsjtx_log.adi file with notepad++ and tried to find the callsign: nothing found. Now I find the qso I had this afternoon with him. And his CQ is green,

By Pietro Molina · #38425 ·

Re: I can transmit, but cannot receive #FT8 #Kenwood #windows12 #windows11

All Who Advised, Thanks. I'm about 75% to get everything working. 1. I had to work with the soundcard. I had to turn off the speakers I had on when I listened to music on YouTube I'm a jazz

By Evan Smith · #38424 ·

Re: Which file WSJTX read to color the CQ? #adiFiles

Hi Pietro, How did you do this cleanup job? What editor did you use? Are yuo sure that you saved the cleaned-up file back as "wsjtx_log.adi" and not something like "wsjtx_log.adi.TXT" ( assuming

By Karza <kari.sillanmaki@...> · #38423 ·

Re: WSJTX Not Decoding #decode

I use a browser called "Brave" - same as Chrome but blocks ads. Especially great with Youtube and their ads. For page/photo copying, if you are using Windoze, just use the snipping tool

By VA3FU · #38422 ·

Which file WSJTX read to color the CQ? #adiFiles

I've cleaned wsjtx_log.adi, and I checked that a call (UA6ATG) is not present, but his CQ line is green. In my color setup new call is checked (both first in band and first one whith light blue). I

By Pietro Molina · #38421 ·

Re: MSK tone issues with Mac mini, IC-9700 and microHAM DXP #MSK144 #AudioIssues

Additional info: The issue with the tones seems to happen when switching between Tx(x) messages. K7IU

By K7IU - Marv · #38420 ·

MSK tone issues with Mac mini, IC-9700 and microHAM DXP #MSK144 #AudioIssues

I'm having an issue where after a few minutes, the MSK144 tones are corrupted and I can't complete MSK144 QSOs. When I switch to FT8 the tones are correct and when I click on TUNE I get a good tone.

By K7IU - Marv · #38419 ·

Re: I can transmit, but cannot receive #FT8 #Kenwood #windows12 #windows11

Not sure what you mean by "have your receive to get signals" > Ron - KJ5XX

By Ron · #38418 ·

Re: 17 meter FT4 operators. #FT4 #WSPR

It only complains if you'r on 30 meters. Request to developers: Extend the "WSPR Guard Band" feature to work also on 17meters. 73's de Kari, oh2gqc

By Karza <kari.sillanmaki@...> · #38417 ·

Messages