I had a similar issue with FT8 on a Yeasu FTDX-1200, WSJT-X 2.5.4 on Mac OS. I traced the issue to an offset that somehow got set in FT8. This resulted in the wrong frequency being set on the

I'm back. I finally was able to fix soundcard issues. My TS-480 can transmit. Now there is no receiving. Rarely I see aa station transmitting, The Band Activity Receiving is only less than 20 db.

I'm temporarily locking this thread whilst I consider a post which is awaiting moderation. 73 Roger GW4HZA moderator

Apologies - looks like this mut be posted on the wrong forum. 73 Mike M0AGP

Paul, I use AdBlocker+. It keeps websites ad free so when I download a photo, either by right-clicking it to copy it and then left-clicking to save the image to my folder of choice or I use a small

Hi Paul, The spectrum has higher peaks at 120 Hz steps from you wspr carrier at 1500 Hz. How those go down with the distance from the carrier tells that the AM modulation mostly contains a short

I was trans,otting on FST4W-1800 and spotted that one station DL0AO reported my first transmission that had started at 1900z when the clock was showing 192930z, several tens of seconds BEFORE the

Hi Reino Thank you for providing advice! Please excuse my ignorance on WSPR and WSJTX - I am learning! How can you tell I have 120hz and 60hz AM? Thank you again! Paul

Fully agree. But, have a biggger monitor and small resolution :)) Or even, change the font size as explained very well here. I'm that happy. Thank you. Ersoy, TA2OM -- Diese E-Mail wurde von

Never noticed and thought that with progressive lenses. Thank you very much for the detailed information, which explained the situation and solution. Much appreciated, Ersoy TA2OM -- Diese E-Mail

Solved. Thank you for your kind help. -- Diese E-Mail wurde von Avast-Antivirussoftware auf Viren geprüft. www.avast.com

You have received the "hash" of a non-standard callsign but have not yet received the actual callsign in order for WSJTX to know the callsign to which the "hash" refers. For example, until you have

Ron, See User Guide 7.5. Nonstandard Callsigns. By the way you may search the User Guide using Windows Ctrl-F to activate is and typing e.g. string '< .' , where there is a single space between the

I searched for an answer and didn't find one so here is a new question...I've recently been seeing call signs as '<...>' in the receive window and don't understand what they are showing. Seems like I

I have to take my glasses off to use my displays. I got hooked in to progressive glasses and never again. Need the entire field of view and it would be worth it to change glasses for normal daily

For completeness, for some unknown reason the menus on Mac iOS 2.5.4 have slightly different names, but otherwise seem the same. On iOS the Settings Menu is located at WSJTX>Preferences. Also, while

Just a quick note about sharing. I've operated quite a bit of FT4 lately and noticed a trend of sorts. It seems that some people are ignoring the WSPR signals on 17 meters (and probably many other

File/settings. General tab far right hand side under display heading sent by ve3wej on lg phone

Hi, There are some OM's among HAM's have not the newest eyes. Me also had a eye surgery ...Therefore I tried to have the WSJTX window a little bit bigger. Setting the resolution down on the laptop

My issue is now resolved. I needed to enable Network Time Protocol(NTP) I am transmitting about 8 dBm. My call is KI5MIV. Check me out today on 20m. I am amazed at the distance of stations that can