main@WSJTX.groups.io

Re: Working a Fox while not a Hound #FoxAndHound

No, I'm stating that those forks that are violating Joe Taylor's request that his protocols not be used for automatic (robot) operations and those that misuse the multiple stream capability contrary

By Joe Subich, W4TV · #38372 ·

Re: Working a Fox while not a Hound #FoxAndHound

That is true ... but its also true that some of them added 'features' that specifically went against the operating rules of many countries (automatic QSOs), ignored the requests of many operators to

By neil_zampella <neilz@...> · #38371 ·

Re: 2.6.0-rc4 crash, without CAT #Cat_RigControl

try lowering your baud rate for cat in the radio and the software. it sound to me that maybe the rate is too high for the computer to keep up Dave Garber VE3WEJ / VE3IE telia.com@groups.io>

By Dave Garber <ve3wej@...> · #38370 ·

Re: WSJTX Not Decoding #decode

Hi Paul, Ok first, you have a severe 60 Hz NOISE on your signal! I.e. all of those vertical lines spaced 60 Hz apart. Looks like bad filtering on your power supply. Try powering with a battery &

By JP Tucson, AZ · #38369 ·

WSJT-X V2.5.4 crashes on Band Hopping Yaesu FTDX-5000 #Yaesu #WSPR #wsjt-x-crashing

Hi All When I run WSJT-x in WSPR mode band switching it will run for about 15 min and then shut down and go away. Is there any debugging for this? Is this a known problem? Using a Yaesu FTDX-5000

By Chuck Bigbie · #38368 ·

Re: 2.6.0-rc4 crash, without CAT #Cat_RigControl

Version prior to v2.6 does not crash. RFI ? Is v2.6 more sensitive to RFI ? Regarding loosing the CAT connection, it happens during Rx when I turn the Rig VFO. This was not any issue until I

By Bengt SM6MUY · #38367 ·

Re: Working a Fox while not a Hound #FoxAndHound

Joe, as for the “bastard forks” you’ve mentioned more than once, remember that Joe Taylor intentionally released the software as open source and explicitly invited independent experimentation

By Randy K7RAN · #38366 ·

Re: WSJTX Not Decoding #decode

The link as such gave the relevant information, actually I did not noticed those ads at first look at all! Your signal has a very strong 120 Hz amplitude modulation and some 60 Hz as well. Is your

By Reino Talarmo · #38365 ·

Re: Removed Worked Countries from WSJT-X #adiFiles

Thanks, Kari, That did exactly what I wanted. I also changed the color scheme so a LOTW station has a different font color than a non-LOTW station. That way I not only see the Countries I need, but

By Carl Nord · #38364 ·

Re: WSJTX Not Decoding #decode

I am on usb.

By Paul KI5MIV · #38363 ·

Re: WSJTX Not Decoding #decode

I am using a Red Pitaya to transmit WSPR. I am using a PC that is connected to the internet through WiFi. The Red Pitaya is connected to the PC using an Ethernet cable. The Red Pitaya is running the

By Paul KI5MIV · #38362 ·

Re: WSJTX Not Decoding #decode

If you can suggest another way to share pictures without ads, I welcome your suggestion.

By Paul KI5MIV · #38361 ·

Re: WSJTX Not Decoding #decode

For one thing, your clock is off by about one minute.

By Paul W5PF · #38360 ·

Re: WSJTX Not Decoding #decode

If you are trying to copy wspr mode , as that is the mode you are set for, the screen does not look like a clean signal of anykind. perhaps check 10.140 if you have a 30m antenna also are you on

By Dave Garber <ve3wej@...> · #38359 ·

Re: WSJTX Not Decoding #decode

OH RIGHT. Just what I need. Another link smothered in advertising and hard to see the desired information. Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb

By Gilbert Baron · #38358 ·

Re: WSJTX Not Decoding #decode

What mode is that? Is yoir time clise as per http://time.is ? 73, Willie N1JBJ

By William Smith <w_smith@...> · #38357 ·

Re: WSJT-X 2.6.0-rc4 Auto Seq observation #mainscreen

I should add that I have WSJTX configured to use the RR73 three steps sequence.

By Dave w6de · #38356 ·

Re: Error when opening WSJTx #Windows10

Kevin, WSJTx is version 254 I am using JTAlert version 2.60.2 ACLog Version 706 73, Art

By Arthur Petteway · #38355 ·

Re: WSJT-X 2.6.0-rc4 Auto Seq observation #mainscreen

I also had this happen. Configuration: WSJT-X 2.6.0-rc4, Windows-10, IC-7610, DXLab Commander "radio" selected in WSJTX, with SpotCollector directly interfacing with WSJTX, Contact already logged

By Dave w6de · #38354 ·

WSJTX Not Decoding #decode

Please see the following link. Why is WSJTX not decoding? https://imgur.com/a/z1w1nOy

By Paul KI5MIV · #38353 ·

Messages