Not if the developer makes the decision, up front, to use a portable toolkit. Then it is a complete and total non issue . . . - Tim -- Tim Dawson 972-567-9360

I wish everyone used the messaging option. Had a good qso with a South American stn on 10M and chatted a while -- *73'S DAVE NU4N*

I was shocked to get a message this way. I didn't know it existed or that it was enabled. (Later I noticed that Gridtracker seems to have that capability too, BTW.) I would feel a little strange

There is an email address for 4X4ZP on QRZ dot com. Ever tried to use email ? It exists since the beginning of the Internet. And you don't have to bother with the annoying JTAlert messages that

I do use JT Alert, and use the msg app. Remember that there are other time apps, and I believe the "Offline" msg simply means the station is not using JT Alert. To each his own, that's what makes Ham

The IC-761 is of an age that does not support PTT via CI-V command. You will need to use a second serial port for hardware PTT, a CI-V converter with a PTT circuit from RTS, or a sound card with a

"Your request would be a lot easier to fulfill if JTAlert supported advanced platforms and not just Whinders . . . . Non-portable software is a complete non-starter in my world (and that of many

I have an IC706MKIIG and have been puzzled in the past when it appeared that everything seemed to be working but no power output.  Make sure that the rig isn't in split and going into CW..  Even

Thanks. -- --w8lvn--

Kent, I spoke to a tech at Tigertronics and he told me the same thing you did. Menu settings for items 29 and 30 won't keep the radio from transmitting. He also suggested a reset of the

Menu number 071 is different from my setting on FT-991A. My setting for menu number 071 is DTR instead DAKY. And my setting for PTT Method is DTR instead CAT. I hope this may be help you. Rick

Agreed on all counts. Several times I've been able to use it to get someone to look for me, and even to suggest a clear frequency on his end. And yes, the only legit uses of ANY non-radio

Your request would be a lot easier to fulfill if JTAlert supported advanced platforms and not just Whinders . . . . Non-portable software is a complete non-starter in my world (and that of many

Bill The inline picture was relegated to an attachment which was garbled on Linux but OK in IOS.  In case you need it here is the text of the deb dependencies The following additional packages will

Bill That's interesting.  Ubuntu 22.04 definitely has libboost 1.74 :- I'm in the process of building a VM to test the deb. Rick (GM4JIB)

Having an issue here with setting up an ICOM IC-761 to work with WSJTX. It will not let me set the CAT control for PTT. I thought I had it working at one time before and then switched to using a

I want to advocate for more use of the Messaging app in the JT Alert companion program for WSJT-X. Right now, I'm watching 4X4ZP on 30 meters with a workable -15 dB signal into North America at 0120

Hi Bill I installed the deb using apt on a clean install of Ubuntu 22.04.1 LTS plus current updates.  Worked no problem. The dependencies that had to be installed were:- Note the boost file

There are several reasons without audio or no output. Make sure the followings: 1.Your send frequency by WSJT-X whether 1400Hz-1600Hz or not? 2. MENU NUMBER 64 and MENU NUMBER 65 in FT-991, Both are