Did you install. NET 6.0? -- John P. WA2FZW

Hello everyone. Hoping someone might be able to help me here. Trying to get JT Alert running on my computer to work with WSJTX. I seem to get UDP errors however despite following the help file in the

Yeah, I think that could be the reason. In that case, just switch to some english locale like US and see how it goes... ᐧ

A bit of source digging later, I believe it's been caused by a change between 2.3.1 and 2.4.0, where these lines were changed from: #if defined (Q_OS_WIN) std::locale::global (std::locale

Since we both seem to be Spanish speakers, my brother offers a thought... maybe there's a locale issue and it's parsing the wrong decimal separator?

Well, it seems like he found the place in the code where this is happenning but the fix is not still right. It seems to be all about getting qrg from the poll and doing the right thing with it: not

... and still another location for interfaces.   This one also sells an 'all-in-one' cable with CAT (C-IV), and built in Sound Card. http://xggcomms.com/Icom-Interface-Shop(2066628).html Neil,

go to CQ Begin is the best way reply to a second conversation before 7 3 can work,  but only where the cycle might drop,  is best practice, but it isn't guaranteed reply to a second conversation

I wonder what ever happened to the thought of the CALL 1st option to call the weakest stations first. Joe (or maybe it was someone else) mentioned it when Call 1st first was talked about. It was an

Sorry, I missed a setting - USB Port Link to [REMOTE] That greys ot the next two settings, but I have used Unlink to [REMOTE] with CI-V Baud Rate 19200 CI-V Echo Back OFF It works with both settings,

"CI-V Address: A4h" That could be the problem, the standard Icom address for the IC9700 is A2h and I think that's the address that WSJT-X will be looking for. Just for comparision here's my settings

I agree, Hold Tx Freq is the first step. And I move my Tx freq often using Shift-click on the waterfall to stay on a clear frequency. As to who I respond to first: - I reply first to the

The NET 6 requirement was posted in my reply to your initial message posted on the HamApps group https://hamapps.groups.io/g/Support/message/41188 Quote... de Laurie VK3AMA

Is that based on what you think you have installed or is it what the Framework Check utility reported? de Laurie VK3AMA

Even better is not to select Windows default for the wsjt-x at all, but an external sound card and no to select that to be default! There are also older rigs that have both mic and data connector

This one should work though there are some recommendations to add chokes to it.  If you get cat errors while transmitting would mean you need to work on RFI in the shack and possibly add chokes to

Click "Hold Tx" which you should already be doing as a best practice anyways. You can handle additional callers however you want.  I tend to favor first come first served unless they are a really

I can confirm that 2.2.0 does work and 2.4.0 doesn't; I haven't tested others.

Unfortunately that leads into a weirder behavior; it initially set my rig to the right frequency , but then it started to drift from 707,46 to 74,6000 to 746000 and so on, then it randomly started

I may have 5.x installed rather than net 6. I look into the that. Tnx Dave -- *73'S DAVE NU4N*