Hi Ken, Very good to hear! When should we sked specifically, and do you know of any other operators who may wish to join in? I am not sure if meteor scatter will cover the distance between the UK and

So you were: 1. Probably using manual logging with N1MM+ 2. NOT using WSJT-X 3. NOT operating on MSK144 Totally off topic me thinks! -- John P. WA2FZW

Were you doing CW or a WSJTX mode? If WSJTX would you have the ALL.TXT info from that contest? Mike W9MDB

I've been doing this for decades, and am using Stratum-1 servers, which I am not sure are accessible in general (it's been so long, I don't recall if I applied for something or not . . . ). You can

Tim, Interesting.  I just took the defaults when Meinberg was installed.  Here is the pool list:  server 0.us.pool.ntp.org iburst minpoll 6 maxpoll 7  server 1.us.pool.ntp.org iburst minpoll 6

You might want to try hard coding some NTP server IP's that you know work in the config file rather than the "pool" NTP entries. I have noticed at times that some of the pool entries can go

Contests may use either the ADIF file or a Cabrillo file. For a contest you would delete (or backup) your wsjtx_log.adi file before the contest.   You can find it by File/Open log directory.  Then

WSJT-x creates ALL.TXT and wsjtx_log.adi, the latter of which is an ADIF file. Look for them in the logs directory, (File->Open Log Directory?). If you use a helper program like GridTracker, it'll

I just looked at my log for a CW contest, NA QSO Party, in DXKeeper. The Start and Stop times for every QSO is the same. 680 QSOs in 10 hours. N1MM Plus is my contest logger, log exported to DXKeeper

Hi Tad, Most probably the best information would be program's source code. But also the Logging window shows fields that will be recorded into wsjtx_log.adi file that is written into the Log

Dan, Yeah, DNS is working.  Here is the output of ntpq: C:\Users\KD0QYN>ntpq -pn      remote           refid      st t when poll reach   delay   offset 

Dan, Good call, but the Windows time service has been disabled.  Again, bummer. MarkKD0QYN

Where can I get detailed info on the logging functionality built into WSJT-X? I would like to learn what contact info can be retained and how, and whether that info can be uploaded as a ADIF file to

Please ignore my last post. I've solved the problem

Good morning, the info on how to set up Kenwwod's TS-480 with the WSJT I found in the group was very helpful but now I have a new problem: When I transmit the equipment is put into split mode with a

Also make sure that DNS is working correctly, and that you have correctly selected either your area, or set specific NTP servers to use. Meinberg's server list(s) are names, not IP addresses, and thus

I know you did what Paul recommended. Add one additional step. Open Computer Management (right click on start icon will open the menu). Left click "Services and Applications" then select Services.

Wierd, do you have some other time-setting program that you forgot you installed, like Dimension 4 or others? Some of those wake up every few hours and make a step change, which sounds like what's

Hi Dom Yep, I’ll be QRV, I’m all set for JT9 G mode with 3el steppir beam. I’ve had a sked with a 4x and we both made the trip hi. Will set the alarm up. Cheers Ken.. G0ORH

The only time start should be end is if you restart the QSO at Tx 4 or such after going to another QSO.Or close the Log window and reopen it. Mike W9MDB