I'm sorry if I sound a lot obsessive bug I am. I have encountered very similar problems several times and eventually nuked the whole thing and reinstalled windows 10 and all the ham software. I've

wrote:

There might be a squelch in the USB connection that is shutting down the connection. Icom has that (unless I'm misunderstanding what it is) so try to find it and set it so that nothing gets

If y haven't already done so you also might try different USB cable.

Do you have ALC feedback connected to the rig? Mike W9MDB

Have you gone through the USB settings for the rig and checked them against some set that is known to work? It sounds like the audio signal that is generated by the receiver is not getting to wsjt-x.

Amos I think that both parties will be on 144.200 for the rest of the QSO. You may try to study https://pskreporter.info/pskmap.html to see 2m activity. I checked last 24 hours and nearest stations

Thank you Lonney! 73, Tad, K3TD

Thanks Mike, I doubt it since the ICOM IC-7610 power output without the amplifier is 100 Watts. I need to turn down the power to about 20 Watts before the amplifier output starts to drop from 500

Check power settings for the comm port you are using for rig control in Windows. Sometimes Windows will turn off the USB ports for power saving. Not saying this is your problem. I have had

Perhaps your audio levels from WSJTX to the rig are down 3dB? Windows playback level at 0dB -- WSJTX at full power -- then adjust audio level to rig (via soundcard or rig menu) to bring up the

Thanks for a helpful summary, Reino. The functionality of forthcoming version 2.6 mentioned in your option #3 is particularly attractive for my situation and operating style. I still maintain, though,

Being a single tone sent at a time, I don’t understand why my ICOM PW-1 amplifier will transmit at a maximum of 500 Watts in FT8/4. It will output 1000 Watts key down, CW and RTTY. I can maybe

Reino My current undestanding is that When I call CQ 200 4X4MF KM72 on 144.174 I just ask the other party to answer me on 144.200. The problem is that because of the local interference on 144.174 I

WSJT-X is displaying FT8 on the bottom left of the display. It also shows 20m and it follows the 590SG frequency exactly when I change the VFO by a little bit. Sheldon KC1NDL

I can hear signals in the rig speakers all the time. The audio signals do not fade as the waterfall descends. However, there are large blank areas in the waterfall occasionally interrupted by a

I found this online. I can't verify since I don't own a 7300. IC-7300 digital modes/FT8 setup WSJT-X Radio tab Serial Port: /dev/cu.SLAB_USBtoUART Baud Rate: 115200 Data Bits: Eight

I had to create a new User profile in Windows 10 and now sign on with that profile. Unfortunately, WSJT-X is still updating the Log Files in the old Profile's folder. How can I force WSJT-X to use the

Justin, Double check these settings, Here are the main settings in the Connectors menu. ACC/USB Output Select, AF ACC/USB AF Level, 30% Adjustable ACC MOD Level, 50% USB MOD Level, 20%

What do you hear from your rig speakers when you first start up wsjt-x and see signals in the wsjt-x waterfall AND as the wsjt-x waterfall signals fade? As the fading occurs, do the signals move