Amos I think that both parties will be on 144.200 for the rest of the QSO. You may try to study https://pskreporter.info/pskmap.html to see 2m activity. I checked last 24 hours and nearest stations

Thank you Lonney! 73, Tad, K3TD

Thanks Mike, I doubt it since the ICOM IC-7610 power output without the amplifier is 100 Watts. I need to turn down the power to about 20 Watts before the amplifier output starts to drop from 500

Check power settings for the comm port you are using for rig control in Windows. Sometimes Windows will turn off the USB ports for power saving. Not saying this is your problem. I have had

Perhaps your audio levels from WSJTX to the rig are down 3dB? Windows playback level at 0dB -- WSJTX at full power -- then adjust audio level to rig (via soundcard or rig menu) to bring up the

Thanks for a helpful summary, Reino. The functionality of forthcoming version 2.6 mentioned in your option #3 is particularly attractive for my situation and operating style. I still maintain, though,

Being a single tone sent at a time, I don’t understand why my ICOM PW-1 amplifier will transmit at a maximum of 500 Watts in FT8/4. It will output 1000 Watts key down, CW and RTTY. I can maybe

Reino My current undestanding is that When I call CQ 200 4X4MF KM72 on 144.174 I just ask the other party to answer me on 144.200. The problem is that because of the local interference on 144.174 I

WSJT-X is displaying FT8 on the bottom left of the display. It also shows 20m and it follows the 590SG frequency exactly when I change the VFO by a little bit. Sheldon KC1NDL

I can hear signals in the rig speakers all the time. The audio signals do not fade as the waterfall descends. However, there are large blank areas in the waterfall occasionally interrupted by a

I found this online. I can't verify since I don't own a 7300. IC-7300 digital modes/FT8 setup WSJT-X Radio tab Serial Port: /dev/cu.SLAB_USBtoUART Baud Rate: 115200 Data Bits: Eight

I had to create a new User profile in Windows 10 and now sign on with that profile. Unfortunately, WSJT-X is still updating the Log Files in the old Profile's folder. How can I force WSJT-X to use the

Justin, Double check these settings, Here are the main settings in the Connectors menu. ACC/USB Output Select, AF ACC/USB AF Level, 30% Adjustable ACC MOD Level, 50% USB MOD Level, 20%

What do you hear from your rig speakers when you first start up wsjt-x and see signals in the wsjt-x waterfall AND as the wsjt-x waterfall signals fade? As the fading occurs, do the signals move

Maybe someone on the WSJTX team can answer why that option is only available for fast JT9 and MSK144. Mike W9MDB

Sri Martin I intended to send that message to Dave, hi! I respect your knowledge on telecommunications. 73, Reino OH3mA

Hi Mike, You may have not followed this mail exchange from the beginning. I was proposing to test, whether the working frequency indication in a CQ message moves the responding radio to the frequency

So, I had the DATA MOD OFF set to Mic, ACC. I changed it to USB and still nothing. The DATA MOD is set to USB.

I checked my midi settings and the audio is not muted.

Had a similar problem with my FT1000MP MKV when the sreen saver started to work (using two monitors on my W11 notebook). This happened with 2.6.0-rc2. After restarting WSJT-X everything was fine