I had to create a new User profile in Windows 10 and now sign on with that profile. Unfortunately, WSJT-X is still updating the Log Files in the old Profile's folder. How can I force WSJT-X to use the

Justin, Double check these settings, Here are the main settings in the Connectors menu. ACC/USB Output Select, AF ACC/USB AF Level, 30% Adjustable ACC MOD Level, 50% USB MOD Level, 20%

What do you hear from your rig speakers when you first start up wsjt-x and see signals in the wsjt-x waterfall AND as the wsjt-x waterfall signals fade? As the fading occurs, do the signals move

Maybe someone on the WSJTX team can answer why that option is only available for fast JT9 and MSK144. Mike W9MDB

Sri Martin I intended to send that message to Dave, hi! I respect your knowledge on telecommunications. 73, Reino OH3mA

Hi Mike, You may have not followed this mail exchange from the beginning. I was proposing to test, whether the working frequency indication in a CQ message moves the responding radio to the frequency

So, I had the DATA MOD OFF set to Mic, ACC. I changed it to USB and still nothing. The DATA MOD is set to USB.

I checked my midi settings and the audio is not muted.

Had a similar problem with my FT1000MP MKV when the sreen saver started to work (using two monitors on my W11 notebook). This happened with 2.6.0-rc2. After restarting WSJT-X everything was fine

I thought I sent a reply but I must have messed it up. I probably won't solve your problem but you didn't mention anything about your rig settings. I don't own an IC-7300 but there is some

Hi Tad, MSK144 settings: F Tol 200 RX 1500 T/R 15s MSK144/Meteor scatter takes a lot of patience and often multiple minutes to complete a QSO. There is activity most mornings - you should be-able

Hi Reino, I was already aware of the QEX document about FT4/8, but thanks for the link anyway! As far as I can see, the modulation used by FT4/8 is GFSK, ie. Gaussian-filtered FSK, as opposed to

No -- that's not how Split works (either Rig Split or Fake It). Nobody knows or cares if you are in split mode. The audio frequency is adjusted to always be in the 1500-2000Hz range.  So if  your

I am using 590SG and W10 too. (My older desktop cannot run W11 so that will not happen) too and DXLABS Commander for radio control. I have never had this problem and I hope I never do. If you find the

I suggest that we stop adding replies to this thread until after Bob NR4U replies to the first reply: https://wsjtx.groups.io/g/main/message/36791 3s, Chuck

Yep, I agree with Dennis. Getting No Decodes is an indicator that your computer clock is not syncing properly. What time syncronization software are you using? Ron - KJ5XX

The problem with that idea is the scrolling will interfere since FT8 is just a 15-second window. If you're on Windows JTAlert has a Decodes window that you can filter by callsign.  And you can also

did you confirm that Wsjt is in fact in ft8 mode, and not another mode, with ft8 frequency showing? Dave Garber VE3WEJ / VE3IE wrote:

audio codec in a signalink is able to have audio issues too. Dave Garber VE3WEJ / VE3IE

It would be nice to be able to right click in the receive window to search for a call sign or country, could this be considered for a future version? Rick NY1V