I like this idea. I get calls during the contest events and have to switch back and forth. A button on the main screen to do that would be really convenient. Ken KB7WHO

Hi Name? Call? I was the CQ VHF contest -- it uses a different exchange. Larry / W1DYJ

The CQWW VHF contest is this weekend. https://www.cqww-vhf.com/  The stations are operating in the special mode NA VHF. 73 Stan KM4HQE

NA VHF Contest Mode ------------------------------------------------------------------------------ President and CTO - Arcom Controllers Makers of repeater controllers and accessories Phone: (503)

There is a VHF contest this weekend. CQ Test is the initial call and the exchange is grid square. No signal reports exchanged.

I was doing FT8 on 6 meters for the first time on that band today, and several stations were sending out "CQ TEST" instead of plain CQ. When I started the QSO, I sent my grid square as usual. Then I

Clearly it is an audio harmonic of FT8 signal. Look for a FT8 signal at frequency around one third of the frequency of the mystery signal about 800 Hz. There may be also another narrower mystery

What you are seeing is harmonics. 2nd harmonic is 100Hz wide3rd harmonic is 150Hz wide4th is rarely seen5th harmonic is 250Hz wide. You can identify which harmonic by the width.  Then divide the

Your image got automatically reduced to the point of uselessness. Why couldn’t it be seriously overdriven FT8? 73, Willie N1JBJ

Could be js8call. Hard to copy the image. What frequency was it at sent by ve3wej on lg phone

Hi guys, I have been using WSJT-X/FT8 and FT4 for years, but I have yet to figure out what this is. I have tried decoding it using all available modes in WSJT-X. None seem to even match up to the

Hi is anyone willing to share some vb.net code which will decode WSJT-X messages? Thanks Clive G4NAQ

Hi Randy, To put this on the right rails may I refer to an excellent paper https://physics.princeton.edu/pulsar/k1jt/FT4_FT8_QEX.pdf It describes how the messages are constructed and source coded. The

I have no idea what your problem might be ... using WSJX 2.6.0-rc1, select Settings (F2) -> Colors and click on the Fetch Now button. When I did that, WSJTX reached out to LotW and downloaded the

Well I did find the file on the computer. "FETCH" did not work even after installing all the files suggested to do a "FETCH". I went to the web page as just got a blank page with nothing

I love the idea of the F/H quick switch button on the main screen. It is actually seldom needed if you are chasing a DXPedition, one usually stays in Hound until you can finally make the contact.

Found the best workaround so far, and it's very simple: Cancel using the Esc key rather than the mouse. Just gotta remember to do it that way. I generally do use the keyboard rather than mouse clicks;

You'll have to convince logger32 to add multicast. Mike W9MDB

Upgrade to the latest Hamlib -- and if you still have problems do the debug stuff too. New hamlib for installation directions #1 Shut down WSJTX/JTDX #2 Download either the 32-bit or 64-bit DLL

Normally it works fine. But if I start to "play" with the radio, IC-7300 WSJT-X "complains after a while (loosing the connection). It's not any new thing. Always been like that. But before it was just