Me too. Not often (two or three times) since I upgraded I had to set manually WSJT to use tx3 instead of tx1 Pietro I2OIM icloud.com@groups.io> ha scritto:

A few weeks back I install WSJT-X v2.6.0-rc1 6744bc following a drive failure. In a few days I noticed an intermittent failure to perform. Initially I attributed the failure to propagation issues but

Hi Kari Thanks for your reply - I will do that and see if that solves the issue. I will get back to you Thanks very much 73 Ray G0VSS

Hi Alan Thanks for your reply, well I did the install on the new pc and then copied across the relevant files as in: “For WSJT-X, you will need to copy the following files, which are located at:

H Ray, The current stable version is 2.5.4 but v 2.6.0 will probably be released soon so you might want to wait for that to avoid multiple upgrades. Go to File => Settings => Audio tab and change

Ray, The easy way is to install WSJT-X properly. Then all the locations are created and you are running in minutes. Where did you get your instructions? Unless I misunderstand what you are doing it

Hi All I have been running WSJTX for a year or so without a problem and I decided to try out WSPR. I am using version 2.2.2 0d9b96 - and yes I know its an old version but I am fairly sure this is not

https://wsjtx.groups.io/g/main/topic/92124104#35918 Kevin k5vp

Hi I installed the WSJT-X 2.6.0-rc1 version to give it a try. It worked with no problems until I tried to go back to the Version 2.5.4, 64-bit. It installed but would not run no mater what I tried

Thanks to Laurie VK3AMA here, and to Mark W2OR for the multiple off line emails that helped me out here. I found out, quite by accident today, that the decoded stations that I "worked before"

John, I am using N1MM+ and it’s free, integrates with WSJT-X and does network logging. https://n1mmwp.hamdocs.com <https://n1mmwp.hamdocs.com/> 73, Andreas, N6NU

Last night I tried to get DAX to fail by using up a lot of system resources. With 8 panadapters and slices running in SSDR and 5 instances of WSJT-X and JTAlert active, I started streaming HBO Max

Jim, Sorry, wrong quote:-) But the answer was directed to you and your problem. 73 Alan G4ZFQ

Pat It was so long ago I don’t remember the details. I’ll check later today and let you know. -- 73, David, N4IW

Thanks Alan, but you're responding to Ed's problem, not mine, which is the assignment of my ASUS U5 as my Default Communications Device, which is gumming up the works. 73, Jim K9YC

Jim In Windows "Sound" panel select the one that needs to be default, usually the on-board sound. Then click "Set Default". Do this in both the Playback and Recording panels. 73 Alan G4ZFQ

Somehow, the ASUS Xonar U5 USB sound card I use for WSJT-X has gotten assigned as the Default Communications Device, and I can't figure out how to remove that assignment. It was working fine before,

Thanks Kevin! You are absolutely correct! It was RF getting into the computer/cable. After experimenting some more after my post, I realized that I failed to reconnect my station ground after field

I haven't tried google drive but I know OneDrive doesn't sync worth a hoot...20-30 minutes...Dropbox on the other hand syncs almost immediately and I use that on two different computer across the

If you hover over the WSJTX icon on the task bar do you see the waterfall window? If you do right-click it and select "Move" -- then move your cursor keys and you should then be able to move your