Thanks to Laurie VK3AMA here, and to Mark W2OR for the multiple off line emails that helped me out here. I found out, quite by accident today, that the decoded stations that I "worked before"

John, I am using N1MM+ and it’s free, integrates with WSJT-X and does network logging. https://n1mmwp.hamdocs.com <https://n1mmwp.hamdocs.com/> 73, Andreas, N6NU

Last night I tried to get DAX to fail by using up a lot of system resources. With 8 panadapters and slices running in SSDR and 5 instances of WSJT-X and JTAlert active, I started streaming HBO Max

Jim, Sorry, wrong quote:-) But the answer was directed to you and your problem. 73 Alan G4ZFQ

Pat It was so long ago I don’t remember the details. I’ll check later today and let you know. -- 73, David, N4IW

Thanks Alan, but you're responding to Ed's problem, not mine, which is the assignment of my ASUS U5 as my Default Communications Device, which is gumming up the works. 73, Jim K9YC

Jim In Windows "Sound" panel select the one that needs to be default, usually the on-board sound. Then click "Set Default". Do this in both the Playback and Recording panels. 73 Alan G4ZFQ

Somehow, the ASUS Xonar U5 USB sound card I use for WSJT-X has gotten assigned as the Default Communications Device, and I can't figure out how to remove that assignment. It was working fine before,

Thanks Kevin! You are absolutely correct! It was RF getting into the computer/cable. After experimenting some more after my post, I realized that I failed to reconnect my station ground after field

I haven't tried google drive but I know OneDrive doesn't sync worth a hoot...20-30 minutes...Dropbox on the other hand syncs almost immediately and I use that on two different computer across the

If you hover over the WSJTX icon on the task bar do you see the waterfall window? If you do right-click it and select "Move" -- then move your cursor keys and you should then be able to move your

I cannot answer that but I can tell you that since I removed Edge decoding is now much more reliable than it used to be. Before I would have to restart DAX many times a day. Now I don't have to. It

On Sunday, July 3, 2022 at 04:40:53 PM PDT, Gilbert Baron <w0mn00@...> wrote: I think you do not want to set those being used for the radio as default device because Windows sounds is the

New computer with Windows 11. Installed 2.5.4 ok, The Waterfall does not come on, When I click on Waterfall nothing happens, cannot see it. What do I do? Everything else seems to work ok.

if both occurances are send via udp to gridtracker, they can resend to your log ( if supported), but you log program must be running on at least one computer.. I tried using google drive, but each

By capturing the audio device? It is Windows, after all . . . it really wasn't designed to make sense . . . :-) Even the high end digital audio multitrack audio devices only support one open of a

no issue using on 60m on either of my hf rigs ( not ftdx10) but make sure fake it is turned off, it will make you transmit ( or try) out of band ( oob) Dave Garber VE3WEJ /

I am still trying to understand how a web browser affects audio input and output Dave Garber VE3WEJ / VE3IE wrote:

I think you do not want to set those being used for the radio as default device because Windows sounds is the correct user of default device and any Windows sounds will go to your radio. Not a good

I stopped this by having wsjt go direct to the radio only while doing ft modes, and then log program did not need cat control not the best, but otherwise com0com and win4yaesu is an expensive option