Gary K3OS posted this: WSJT-X wants to control the radio.  Normally with CAT control enabled and the radio selected, it shifts the radio into data mode.  That works fine on all frequencies but 60

I have tried a few times and can't figure out how to get my Ftdx10 to work on FT8 since the FTdx10 has special memory slots for 60m that don't seem to play nice with the program. It;s not a huge deal

When you say disabled do you mean you completely removed it or just changed the settings?

I have found Windows Edge Browser to be a train wreck and have also disabled it. -- 73, David, N4IW

Hi Larry, I re-read your original mail and the error message you got was generates due to the second initiation attempt. The real reason why the 2.5.4 did not opened in first place is not clear to

Over time, many of the available three-character special event call signs in the U.S. will make their way into the ADIF log kept by WSJT-X. This may make you think you've already worked a special

I found a link here for the proper setup for tx audio on Elecraft transceivers. Thanks to the person that posted it. I am a little unsure of a few things I have read or been told, perhaps someone here

I started up my Flex 6700, SSDR v2.7.6 , and WSJT-X as usual this morning. Just a few minutes after decoding started it suddenly stopped on all slices. Normally I have to restart DAX several times a

Guys expedition to rare grids on VHF, and use Contest Mode to speed up contacts. The convention is for expeditioners to use VHF Contest mode and transmit first/even sequence. Expeditions are announced

Hi Reino and all, Note: My computer knowledge (15 years ago) was Intermediate at best. Prior to sending out my first email, I checked user>AppData>Local>WSJT-X for All.txt, WSJT-X.ini, wsjtx.log

Did you reboot? Should reboot after loading newer version. To Gary's point...This was all done a day or two before our vacation and I don't recall rebooting then. When we got back from our trip the

Hi Bill, As presented in User Guide 7.4. Contest Messages both NA VHF Contest and WW Digi Contest (HF) exchange only grid and use that message. The latter ends with RR73, no 73. 73, Reino OH3mA

NA Field Day was last weekend. Sent from the all new AOL app for iOS

Many of the Field Day QSOs that should have been completed were using the shortened method. If WSJT-X didn't progress through to the point the log applet displayed, I kept going three times or so and

And there was a recent VHF contest and they probably forgot to remove the contest check mark. No issue. 73 NA8W Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows Sent:

Hi Ty, Others have mentioned that it is a VHF contest mode to gather grids only. I understand that now, but this was on the HF bands and not in a contest. So, I guess that I will just log it

I already posted this info on the VARA-MODEM area, but thought this might be of use over here also.  This can happen with any two programs accessing your radio using a virtual USB ComPort. Just in

Lawton first thing make sure squelch is not involved. Check the Preset settings as described in the manual on page 65. Also make sure the mode is USB and Preset as described on the top of page

On any band I am collecting grids. Many stations respond to my CQ with a report and consequently I ignore them initially. If they persist I modify Tx1 to ask for a grid and only on one occasion out of

I am using a FTDX 10 and I have used FT8 with a FTDX 5000 for 3 years. In trying to set up the DX 10, I am getting this message: Error in sound input: An error opening the audio input device has