how are you sending audio to the radio, interfacing through a Signalink, or internal to radio sound Dave Garber VE3WEJ / VE3IE

audio codec drivers would be downloaded from the manufacturer of the radio, not wsjt. so i would go to yaesu and download it, install it, restart the computer, then select the audio codec ( which

Good information. Is there a way to verify this? Eric J Evans Amateur Radio Operator: K4NDN Elkton, VA. USA, 22827 Grid: FM08qj 540.335.6178 e.evans1369@... -- K4NDN

ARRL have recommended the same "contest" sub-bands for all digital contests. That they haven't specified them for Field Day looks like an oversight since FD is run by the Communications Department

1) When in Contest mode calling CQ especially in FT4/SO2R, there is not enough time to reset the TX Enable button. Is there a way this could be changed to allow a "pending enable TX" so you could

The ARRL has not released any information on a frequency change for field day. One would think that since we begin setup in about 14 hours that no frequency change will be recommended. But who

Not necessarily, The ARRL suggested different FT freqs in the past because of the terrible confusion that happens when NON FD people try to work you. so contesting was often placed somewhere else so

Those frequencies which we use during any other event, it is not a F/H event. aol.com@groups.io> wrote: Eric J Evans Amateur Radio Operator: K4NDN Elkton, VA. USA, 22827 Grid:

Wondering what FT4 & FT8 frequencies are likely to be the hot spots during this weekends Field Day? 73, Dick- K9OM

Does anyone have the steps for installing WSJT-X 2.5.0 on Windows 11? My rig is an FTDX10. What additional drivers do I need since I can't find USB AUDIO CODEC? Also, how do I select a virtual COM

It really Fox that defines the frequency and wsjt-x informs Fox operator: --------------------------- Please choose another dial frequency. WSJT-X will not operate in Fox mode in the standard FT8

I Hope someone can help. When I am in a QSO on fT8 everything works fine until the last transmission from me. It does not transmit through the full transmission cycle. The transmission goes on and

I wonder whether it would be helpful if instead of remaining on the normal FT8 frequency for the band currently in use, selecting 'Hound' mode changed the Hound frequency to whatever seems to be most

Dennis, You can set up WSJT-X for field day operation. On the WSJT-X main window... Select FILE, then SETTINGS Go to the "Advanced tab"... Select the check box for "Special Operating Activity" Select

GM Dennis My recommendations are as follows: 1. I don’t use automatic logging. I found it missed some QSOs, and didn’t provide enough operator feedback to ensure all the QSOs were logged. 2.

I think auto logging it has been changed to be contest mode allowed only......(see under reporting tab) Dave Garber VE3WEJ / VE3IE

Guys forgive me if my question is a combination of programs ! I use wsjtx with JT Alert and N3FJP for logging and everything is automated. I make the contact and it logs !!! I am going to

To add some context to this he has a sound card speaker jacked plugged into a MIC jack.  So, very easy to overdrive things  (MIC input expecting -60 to -40dBu, line level -10dBu, and speaker level

Mike If overdriving is the issue, 3 resistors can create a 20db audio attenuator. That may be all you need. Dennis W1UE

Well, Mike Black, W9MDB, looked my system over today and recommended replacing the $10 external USB sound card with something more configurable such as a SignaLink. The current sound adapter is over