Neither of these understand how chokes work. When I measured a Balun Designs product several years ago, it didn't look ANYTHING like their online data sheet. Palomar sells the wrong mix parts. Steve

"Richard ORourke" <rickorourke@...> wrote: You need the qt5-qtserialport-devel package installed -- Brian G8SEZ

"Richard ORourke" <rickorourke@...> wrote: You need to install boost-devel The names wsjtx is using are because it is developed using Debian-style library names. Fedora uses different names so

"Richard ORourke" <rickorourke@...> wrote: The package you need is named: qt5-qtserialport HTH -- Brian G8SEZ

Have you checked your time? http://time.is Mike W9MDB 

Both questions are answered in the links I posted. RFI-Ham.pdf has Fair-Rite part numbers for the most useful sized parts and lists a number of vendors. It also includes a table you can fill in to see

Mike Black, I believe the spots you see are when the radio was connected to my older laptop.  I've attached a diagram of how I have things physically configured.  To move between the old and new

cat /etc/redhat-release Fedora release 36 (Thirty Six) ..so it's a Fedora36 installation. dnf search Qt5 | grep -i serialport <some lines omitted> qt5-qtserialport.x86_64 : Qt5 - SerialPort

Update; I uninstalled again but this time I manually deleted the C:\WSJT and C:\Users\suenr\AppData\Local\WSJT-X folders. I had to reboot 1st though. Something was still in use and it wouldn't delete

Changed rigs from KX3 using serial USB adapter to K3s with USB radio interface. Before WSJTX worked fine but suddenly the FT8 mode would randomly just switch from audio signal going to K3s via usb to

Mike, I installed hamlib 4.5 and the wsjtx_log_config file, attempted to make an ft8 connection but it still fails.  I'm attaching the rig control log.  Thanks!!! I'm new to the Groups application

/home/RickO/Downloads/wsjtx /qt5-qtserialport-5.15.3-1.fc36.x86_64.rpm does not provide the required ake Error at /usr/lib64/cmake/Qt5/Qt5Config.cmake:28 (find_package): Could not find a package

Last metadata expiration check: 0:03:08 ago on Tue 21 Jun 2022 11:40:16 AM MDT. No match for argument: Qt5SerialPort Error: Unable to find a match: Qt5SerialPort

My transmit Macros for FT8 have disappeared. How can I restore them?

-- Install# Fedora 36 provides boost-devel-1.76.0-11.fc36.i686, wsjtx asking for boost0devel-1.71 error: Problem: conflicting requests - nothing provides libboost_filesystem.so.1.71.0()(64bit)

This started after I adjusted the PWR slider down. I restored it to full but it never went back into TX.

Output folder: C:\WSJT\wsjtx Output folder: C:\WSJT\wsjtx\bin Can't write: C:\WSJT\wsjtx\bin\Qt5Core.dll

What could cause WSJTx to suddenly stop transmitting? It's a PTT issue not audio. The CAT test and PTT test operate normally. As does TUNE. TIA KD0XX Rod

I reinstalled today because wsjt stopped band hopping. It immediately started the crashing again when it tries to hop. I reinstalled the INI file it crashed a couple of times. How do I send you the

Rick Did you get an answer to your question?  I have a functional 991a setup here and would be happy to share any info I have to help you. 73 Keith/KI5US