Hi Mike, To run a second TX audio will double the audio power going to the transmitter. I would assume that most foxes will run their transmitter at optimum power out already, so doubling the audio

This morning I noticed that some signals that are above 1000 Hz are being displayed in the Band Activity window while in Hound mode. This is with the Rx All Freqs button unchecked. All of the

Me too, with automatic switch Pietro I2OIM

I think the new HRD Alert window should be showing you that. Mike W9MDB

In no particular order ... 1) Clear Band Activity, RX Frequency, and DX Call on any change of band or change of mode. The data is not usable after a band/mode change. 2) Move Fox/Hound and

When replying to a QSO, is there a way to determine within WSJT-X if I have worked that station / calls before? Or do I just need to do a search in my HRD logbook?

Hi Gary and all, THIS is exactly why I always use JUST the wsjtx log, and then manually upload to QRZ, LOTW... Because the wsjtx log will save it as CAPS no matter how you enter it. Sure, it's a

In no particular order ... 1) Clear Band Activity, RX Frequency, and DX Call on any change of band or change of mode. The data is not usable after a band/mode change. 2) Move Fox/Hound and

During Meinberg installation fast burst is an option. Also a common mistake some make is forgetting to use the pulldown to set their country (and if missed Meinberg won't work). Mike W9MDB

I would like to add that I see LOTS of operators doing "blind calling" where it's quite obvious they are NOT decoding the DXpedition. Please do not do this....if you aren't decoding them then they

Agree to Dennis votes for a contest mode button (but not an automatic switch). Regarding F/H: the proposal just storing a separat F/H configuration suggested some weeks ago and switch the

In the normal ntp-client, there is a directive called iburst that handles exactly the startup problem you have. I checked the Meinberg documentation and it is mentioned there. Unfortunately I am on

I'm using Hampi 64 bit on a raspberry Pi 4 when I use VNC on display :1, WSJT-X doesn't see my external sound device, working from console and VNC via display :0 No idea if anyone else has come

Hi JP, Especially three-digit directional calls (CQ USA, CQ CAN, etc.) could sometimes not be answered correctly. Auto Seq stopped or went crazy. This was corrected. But we had to make sure that the

I think part of the problem may be here -- setting maximum width without knowing the scaling seems like like a potential problem.Maybe this should be minimum width and minimum height?   if (pointSize

Sorry, Uwe. My buttons never change sizes even after restarting the GUI. I even restarted Windows. I finally figured it out but this will not work on my 5k monitor… To make this work, I had to

I managed to cure that by adding Q65 to the list of modes. Someone suggested updating ADIF Master, but I already have the latest issue loaded.

Because I don't use LoTW or eQSL, so not an option. I use VQLog as my main logging program but I would like to combine the wsjtx_log.adi files into one file so that each instance knows what has

Sounds great Dennis.I was on a cruise and stopped there. Please please don't the water. My wife did and got sick. I drank beer and had no problems. Enjoy your trip if you have been there it is one of

Those of you still experiencing problems with the GUI scaling, please try my following test