During Meinberg installation fast burst is an option. Also a common mistake some make is forgetting to use the pulldown to set their country (and if missed Meinberg won't work). Mike W9MDB

I would like to add that I see LOTS of operators doing "blind calling" where it's quite obvious they are NOT decoding the DXpedition. Please do not do this....if you aren't decoding them then they

Agree to Dennis votes for a contest mode button (but not an automatic switch). Regarding F/H: the proposal just storing a separat F/H configuration suggested some weeks ago and switch the

In the normal ntp-client, there is a directive called iburst that handles exactly the startup problem you have. I checked the Meinberg documentation and it is mentioned there. Unfortunately I am on

I'm using Hampi 64 bit on a raspberry Pi 4 when I use VNC on display :1, WSJT-X doesn't see my external sound device, working from console and VNC via display :0 No idea if anyone else has come

Hi JP, Especially three-digit directional calls (CQ USA, CQ CAN, etc.) could sometimes not be answered correctly. Auto Seq stopped or went crazy. This was corrected. But we had to make sure that the

I think part of the problem may be here -- setting maximum width without knowing the scaling seems like like a potential problem.Maybe this should be minimum width and minimum height?   if (pointSize

Sorry, Uwe. My buttons never change sizes even after restarting the GUI. I even restarted Windows. I finally figured it out but this will not work on my 5k monitor… To make this work, I had to

I managed to cure that by adding Q65 to the list of modes. Someone suggested updating ADIF Master, but I already have the latest issue loaded.

Because I don't use LoTW or eQSL, so not an option. I use VQLog as my main logging program but I would like to combine the wsjtx_log.adi files into one file so that each instance knows what has

Sounds great Dennis.I was on a cruise and stopped there. Please please don't the water. My wife did and got sick. I drank beer and had no problems. Enjoy your trip if you have been there it is one of

Those of you still experiencing problems with the GUI scaling, please try my following test

FWIW My vote is NO to an automatic switch to contest mode. My vote is YES for a contester switch to toggle between normal and contest modes. I also feel its a better usage for screen space than the

Laurie, 1) You have the wSJTX window and minimum width 2) Your text magnification is inappropriately affecting the labels in those buttons. Do the labels in the "Log QSO", "Stop", etc. buttons

Another important hint: If you change the font size and there are problems with the layout, then restart WSJT-X once. The automatic switching of the button width requires a one-time restart of the

David I will be on Roatan Island, Honduras at the end of November. We are planning on 60M operation at that time. We will look for you then! Dennis W1UE

I see something similar sometimes. I go to start, meinberg and restart the ntp service. It works fine after that. Also, make sure you have iburst for each server in the ntp config file. Bruce -

Now all I need is some qso's Hi Hi. -- *73'S DAVE NU4N*

Laurie, We tested that on various platforms under various conditions. Most problematic was MacOS Monterey in combination with a 4K monitor. With our current algorithm (automatic change of the button

I don't see how QT limits are the cause of the mode selection buttons being of insufficient width and cropping the button text. That IMO is a design decision. None of the other buttons on the UI