FWIW My vote is NO to an automatic switch to contest mode. My vote is YES for a contester switch to toggle between normal and contest modes. I also feel its a better usage for screen space than the

Laurie, 1) You have the wSJTX window and minimum width 2) Your text magnification is inappropriately affecting the labels in those buttons. Do the labels in the "Log QSO", "Stop", etc. buttons

Another important hint: If you change the font size and there are problems with the layout, then restart WSJT-X once. The automatic switching of the button width requires a one-time restart of the

David I will be on Roatan Island, Honduras at the end of November. We are planning on 60M operation at that time. We will look for you then! Dennis W1UE

I see something similar sometimes. I go to start, meinberg and restart the ntp service. It works fine after that. Also, make sure you have iburst for each server in the ntp config file. Bruce -

Now all I need is some qso's Hi Hi. -- *73'S DAVE NU4N*

Laurie, We tested that on various platforms under various conditions. Most problematic was MacOS Monterey in combination with a 4K monitor. With our current algorithm (automatic change of the button

I don't see how QT limits are the cause of the mode selection buttons being of insufficient width and cropping the button text. That IMO is a design decision. None of the other buttons on the UI

Uwe, Hmm… *slightly* expands is correct. On my screen (a 27” 5k monitor), they expand *maybe* 1 mm and that’s being generous. It’s really not enough to make a difference. As stated

Hi Joel, Width of the mode buttons slightly expand when you expand the width of the main program window. See if that works for you. What font size do you use? Because I have built-in an automatic

Did a member test it with Quisk as v2.5.4 does not work with Quisk due to Hamlib issue? 73 - Pierre - FK8IH

Last posted image got resized to being worthless. Trying again de Laurie VK3AMA

I have the same problem.  Solution:  (for Meinberg NTP) Go to your ...\NTP\bin folder, and find the "restartntp.bat" file and create a named desktop icon to run it.  Move the desktop shortcut out

Agreed. 73, Jim K9YC

That's what CAPS LOCK is for on your keyboard <G>. 73, ... Joe, W4TV

Almost every NTP deployment I have seen makes a step change at boot, since nothing will be affected at that point, and then corrects/maintains time thereafter, so I would not worry about it. -- Sent

Have you checked for notes on this radio at Tigertronics? They are generally very good at providing setup information for the Signallink. -- Sent from my Android device with K-9 Mail. Please excuse

My NTP works great all of the time and the Offset (seen in Quick NTP Status) is always well below 5.00. Great. The one oddity is when the computer is turned on from a cold start in the mornings,

Is the FT-991A Menu 070 DATA IN Select set to REAR? Is the FT-991A Menu 072 DATA PORT Select set to DATA? What cable are you using to connect Signalink to the FT-991a? 73, ... Joe, W4TV

Ft-991a Opesnsuse Linux 15.3 Wsjt-x 2.5.4 (latest in repository) I am again trying to get my 991A working with a serial cable and signalink. I have CAT working. I can receive and decode with wsjtx. I