That's what CAPS LOCK is for on your keyboard <G>. 73, ... Joe, W4TV

Almost every NTP deployment I have seen makes a step change at boot, since nothing will be affected at that point, and then corrects/maintains time thereafter, so I would not worry about it. -- Sent

Have you checked for notes on this radio at Tigertronics? They are generally very good at providing setup information for the Signallink. -- Sent from my Android device with K-9 Mail. Please excuse

My NTP works great all of the time and the Offset (seen in Quick NTP Status) is always well below 5.00. Great. The one oddity is when the computer is turned on from a cold start in the mornings,

Is the FT-991A Menu 070 DATA IN Select set to REAR? Is the FT-991A Menu 072 DATA PORT Select set to DATA? What cable are you using to connect Signalink to the FT-991a? 73, ... Joe, W4TV

Ft-991a Opesnsuse Linux 15.3 Wsjt-x 2.5.4 (latest in repository) I am again trying to get my 991A working with a serial cable and signalink. I have CAT working. I can receive and decode with wsjtx. I

All in one’s preferences, I like it better than dark…… 73 OM K4NDN yahoo.com@groups.io> wrote: Eric J Evans Amateur Radio Operator: K4NDN Elkton, VA. USA, 22827 Grid:

I tried it and I fiddled, but have to admit I didn't care for it. Tried a lot of combinations of colors but couldn't find anything that was as good as dark mode. Since the "flick" is only a very minor

Outstanding! Glad to help 73 K4NDN wrote: Eric J Evans Amateur Radio Operator: K4NDN Elkton, VA. USA, 22827 Grid: FM08qj 540.335.6178 e.evans1369@... -- K4NDN

*I it working now. Thanks for offering to help.* *73's DAVE NU4N* -- *73'S DAVE NU4N*

Added frequencies do not repopulate on most/(any?) upgrades…maybe a future REV but it only takes 5 seconds to add it. Eric J Evans Amateur Radio Operator: K4NDN Elkton, VA. USA, 22827 Grid:

NO DAVE IT DID NOT SAVE. ANOTHER HAM HAS SEND ME THE DIRECTIONS. I WILL TRY WHAT HE SAID. IF NOT I WILL GET BACK TO YA. -- *73'S DAVE NU4N*

THAT HELPED OUT A LOT THANKS -- *73'S DAVE NU4N*

Thanks for the reply. Appreciate it. 73's Dave -- *73'S DAVE NU4N*

On WSJT-X Click FILES, SETTINGS then click the FREQUENCIES Tab, in the body of the frequency modes regions box RIGHT CLICK and select INSERT then enter the appropriate information. 60 is 5.357 in

Did it not save when you upgraded. Or did you uninstall it? Then reinstall. I am not home right now so i cant look it up but maybe frequency reset might bring them in or wait for the knowledgeable to

Try the ‘high contrast’ option in Windoze 10…works for me..takes some fiddling but I like it yahoo.com@groups.io> wrote: Eric J Evans Amateur Radio Operator: K4NDN Elkton, VA. USA, 22827 Grid:

I HAVE THE FREQ''S FREQ'S FOR 60 METRS. I FORGOT HOW TO SET UP 60 IN WSJT? THANKS -- *73'S DAVE NU4N*

Hi Palle, There is no bits for a contest "name" in the messages as such and contest specific messages a recognized only by the message construction as some stage of the QSO message exchange. Some of

I have noticed when manually trying to enter a contact in WSJT-X in FD mode while using N3FJP link, that entering the exchange in small letters gets a bad entry when sending to N3FJP. N3FJP requires