Thanks all for the input and ideas. I crawled under my desk and found that one of my grandkids moved my power supply over near the computer. I moved it back and have been running all day! 73

Ron, Did you try stopping and restarting the NTP service in Administrator mode? Sometimes that will help. I run Meinberg and Win10 with no conflicts. I realize ymmv. Good Luck, Dave, KD2SGM

GA Ron, HIHI EXACT same sequence of events and thinking! I finally gave up and a helpful mate here on the forums recommended BKT….I took the advice and never looked back. Solid performance. 73 Bob

Thanks Bob. That is precisely what happened in my case. Dim4 was running just fine, no issues at all, until it wasn't. I suspected a Windows update was the culprit. So I thought "well, everyone

Ron, I suspect your firewall is blocking it. ⁣Jim Bacher, WB8VSU wb8vsu@... https:\\trc.guru​

I had the same problem; could never get it resolved despite significant effort to discover the cause. Also, after a Win 10 update my Dimension 4 stopped working as well with similar error and lack

Hi, for those of you that are on a Linux system the easiest way to automagically split the logfile, e.g. every month or so is to create a "logrotate" script. Actually this could be a part of the

Hello Joe I followed - exactly- the download/installation instructions as written. I upgraded from JTA v2.51.2 to v2.51.4. Previously, everything worked flawlessly without anything causing me to

Additional information While finishing the last FT8 QSO : - My system was sending the "73" message - WSJT-x popped-up the logging window and I entered the TX power and hit 'enter' - QSO was sent

Hello all: I'm a longtime WSJT-X user. Now I'm setting up WSJT-X on a Windows 10 machine connected to a new ICOM 7300. The USB connection to the PC and WSJT-X seems to be working fine. I

Grid Tracker tells me if I have worked a station before. _____________ Rik Rasmussen

I imagine with a different mode... Pietro (mobile)

What is '*ex-FT8*' ? 73, Chuck

Agreed Willie. I even notice how Windows 11 will temporarily recognize WJST receiver audio but then disconnects it quickly. I can see evidence of tones on the waterfall, but they stop averaging and

Echo cancellation, for instance, will mute “sounds I’ve heard recently”, which plays havoc with tone-based communications. 73, Willie N1JBJ

I need everyone to test the latest Hamlib  Testing in Rig Split and Fake It would be appreciated.Successes/Failures please report. New hamlib for installation directions #1 Shut down WSJTX/JTDX #2

What is "external audio processing" ? Mike W9MDB

All, Until recently, I have been unable to run WSJT-X 2.5.4 on a brand new Dell XPS Windows 11 machine while my older Windows 10 PCs worked fine. I was unable to get receiver audio into WSJT-X and by

I should have known (remembered) this was a Contest Mode exchange. Not a "digital" mode contester so the few rare exchanges I've had in the past just didn’t jog my memory. Anyways, thanks for all

Hi Steve, The program that I wrote (and is free) AllText.exe can process any size All.Txt file.It does not load the file into memory. Given the callsigns and the date of the qsoin question it will