Hi Dan, I can only consider, what designers were thinking. First of all that automata don't have memory. So, if it would send a "73 message_2" to a received "73 message_1", then that will happen also

Check to make sure your clock is accurate https://time.is/ Mike W9MDB

Hi, after cq'ing for a time lets say 10-15 minutes please have a look in the www.pskreporter.info if your callsign is there. For transmit frequency find an empty place in te waterfall 73

In the settings menu under general tab I have selected the VHF and submodes. Ignore the VHF part and it opens up the submodes. Then I have the Bins/Pixel on the waterfall set to a 3. KN4FLO, 73. 

hi all… the first arrl ww digital contest is just around the corner, june 4/5 I plan to do another “dry run” this Saturday may 21. Remember the contest ft-x exchange is not the normal

I am running FT8 with an ICOM 7300 an a Mac computer. After opening WSJTX, I am able to receive calls, but when I try a QSO, no one responds to repeated calls. I am sending up to 30W. I can see

How did you manage to set F HIGH to 2500? I can't set it to 2500, it only supports the default value of 1200. 73. EA7QL. El dom, 15 may 2022 a las 17:35, James Buie

Then hopefully can compile the source code. http://n0nb.users.sourceforge.net/ Mike W9MDB

Mike, he’s using a MacBook.

New hamlib for Windows installation directions #1 Shut down WSJTX/JTDX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX/JTDX -- hopefully your browser doesn't block

Hi guys and thanks for the responses! The CAT control works fine with the WSJT-X software and when I click on the PTT button it lights up red and you can hear the radio make a 'click' sound and the

05/15/2022 16:32 UTC. I have some weather moving in at this time. I have powered off my station and will try to get back on the air as soon as the weather passes. I will update again when I can get

05/15/2022 15:45 UTC. I have moved from 2000 down to 1200. I have F Low at 500 and F High at 2500. I am using WSJT-X v2.5.4. I have the Bins/Pixel on the waterfall set to a 3. I am still transmitting

05/15/2022 15:34 UTC. I have adjusted the software on my end and it is now F Low 500 and F High 2500. I am still at 2000. Thank you for the attempt. KN4FLO, 73.

How is the audio connected from the QRP rig to the computer?USB port or audio cable?  Which port of the computer is it plugged into? Mike W9MDB

I am QRV at 28'140, TX/RX 15, F LOW 600 and F HIGH 1200. It won't let me go up to 2500. Let's see if I get lucky and get something. 73. Emilio, EA7QL. El dom, 15 may 2022 a las 16:02, James Buie

Reino, Why won't the automata respond to Tx5? It is included in WSJT-X supplied messages, and is an accepted response everywhere else that I know off. Is there someplace that is documented the I

These are the two possible sequences from the roger-signal-report -- on the 1st one I've seen operators keep sending the 1st 73 until they get one.e.g. W9MDB K4HSQ R-10K4HSQ W9MDB RRRW9MDB K4HSQ

I have seen a few stations who are unaware of the standard sequences. No wonder they confuse themselves and others. Perhaps #RTFM 73 Charlie G4EST www.g4est.me.uk Stay safe out there

I can’t set to 30 and I believe therein lies the problem. If I turn the receiver gain all the way down, still have a 60 or so noise level. Unplug the audio cable coming from the computer and