Thanks, got it ! My old brain had trouble understand the complete QSO concept. Meteor Scatter sounds interesting to me. I may give it a try.

The meteors are making ionized trails, which reflect RF. The more meteors, the more reflections, the better the propagation, and hence the faster the QSO can progress. 73, Willie N1JBJ

It is This doesn't make sense to me. Lots of rocks a minute or 2, otherwise 30 minutes or more ???

Hi Dan: Meteor Scatter (MS) is easy and fun but contacts can take time because you have to wait for the next “rock”. Patience is the watchword. It is common in meteor scatter for QSOs to take

good morning I made 2 contacts this morning on fsk144 50.260and could hear a bunch morebut I have never been on there beforeso I was a little uneasy about trying to make contacts W5PWHDan

Good Morning Gentlemen, I am running Monterey on my MacBook Pro M1 pro and version 2.5.4 of WSJTX. You will need to install the latest Silicon Labs drivers. I believe the current version is

Well Dale I been on 6 monitoring for at least 2 hours. Heard nothing here. Oh well maybe another day. -- *73'S DAVE NU4N*

Hi Robert, no other changes were made. Jamie K6NGN

Hi Dave, Most mornings between approximately 5;30 and 7:30, there are several stns on 50.260 working random meteors. The range of contacts is from about 500 out to 1200 miles. It’s lots of fun.

Hi again. I tried everything suggested with no luck, including transmitting into a dummy load. I'll play with this some more and report back in. Thanks for the help. Robert KI5TPC

Also take a look at DXMaps set to 6M. Bob - wd6dod

Thanks everyone I will try all your great suggestions and get back. Jamie, I was using D-USB so I'll do the opposite of you and give USB a try. Did you change any settings in the software after

I had a similar issue when WSJT-X was set to USB. I changed to D-USB and TX resumed using Win 10. JamieK6NGN

I am not sure if your problem is same as mine. When I migrated from my old MacBook Pro to Mi Pro MacBook Pro and Monterey, I found that the FTDI driver which worked fine with KX3 on my old MacBook Pro

I had the same problem with another Yaseu rig. There was one setting in the radio that I neglected to set after the reset. Found it by going through the menus and checking the manual to make sure

Did you try transmitting into a shielded dummy load?  That can often narrow down the RF-in-the-shack issue.

Hi everyone. My Yaesu FT-991A has stopped transmitting using FT8. I have had this problem a few times but it was always cured by doing a full factory reset of the radio. This time that has not

I am trying to get wsjtx to run on a new iMac using Monterey OS and M chip and a Yaesu FT991 transceiver. I am confused about whether I need SiLab drivers or not. I've searched Google and watched

Thats what I thought. I tried last nite but on 2 meters but I think I had the wrong freq. Tnx Peter. -- Thanks 73's de NU4N/Dave

I always use WSJT-x, if you look at the info on bottom left of pskreporter it often shows the application being used [cid:image001.png@...] Peter M0PWX M0PWX Grabber Page