does aclog at 9600 match what is in the menu for the ts2000. they need to match and make sure not only main band, but be in vfo mode Dave Garber VE3WEJ / VE3IE

Well Jamie I gave it one more try. Still no connection use hamlib with ACLOG. Surely there is a way otherwise the Kenwood would not be in rig settings of WSJT-x. -- Thanks 73's de NU4N/Dave

Yes Jamie I am on the main dial. I never been able to use HAMLIB. What I want to do is let WSTX-X interface with My ACLOG for contests that use digital. My settings as I said is 9600 8N2 with com 6 as

I upgraded from 2.5.3 to 2.5.4. When I start 2.5.4, it runs for approximately 15 seconds, then exits. This is on an i7 computer, Win 10 Home, 64 bit. Any idea what is causing the problem, and more

Hi Dave, make sure the 2000 is on the main band, not sub band. It happened to me. Jamie K6NGN

I was trying to use my Kenwood 2000 with ACLOG. My settings are 9600 8N2. But I keep getting an error not connected. Any help would be appreciated. *73'S DAVE NU4N*

Paths perpendicular to the direction the meteors are traveling are best and parallel paths are poor. Elevation of the shower gradient is best from 0 degrees (shower rise or set) up to about 60

Thanks, got it ! My old brain had trouble understand the complete QSO concept. Meteor Scatter sounds interesting to me. I may give it a try.

The meteors are making ionized trails, which reflect RF. The more meteors, the more reflections, the better the propagation, and hence the faster the QSO can progress. 73, Willie N1JBJ

It is This doesn't make sense to me. Lots of rocks a minute or 2, otherwise 30 minutes or more ???

Hi Dan: Meteor Scatter (MS) is easy and fun but contacts can take time because you have to wait for the next “rock”. Patience is the watchword. It is common in meteor scatter for QSOs to take

good morning I made 2 contacts this morning on fsk144 50.260and could hear a bunch morebut I have never been on there beforeso I was a little uneasy about trying to make contacts W5PWHDan

Good Morning Gentlemen, I am running Monterey on my MacBook Pro M1 pro and version 2.5.4 of WSJTX. You will need to install the latest Silicon Labs drivers. I believe the current version is

Well Dale I been on 6 monitoring for at least 2 hours. Heard nothing here. Oh well maybe another day. -- *73'S DAVE NU4N*

Hi Robert, no other changes were made. Jamie K6NGN

Hi Dave, Most mornings between approximately 5;30 and 7:30, there are several stns on 50.260 working random meteors. The range of contacts is from about 500 out to 1200 miles. It’s lots of fun.

Hi again. I tried everything suggested with no luck, including transmitting into a dummy load. I'll play with this some more and report back in. Thanks for the help. Robert KI5TPC

Also take a look at DXMaps set to 6M. Bob - wd6dod

Thanks everyone I will try all your great suggestions and get back. Jamie, I was using D-USB so I'll do the opposite of you and give USB a try. Did you change any settings in the software after

I had a similar issue when WSJT-X was set to USB. I changed to D-USB and TX resumed using Win 10. JamieK6NGN