I am not sure if your problem is same as mine. When I migrated from my old MacBook Pro to Mi Pro MacBook Pro and Monterey, I found that the FTDI driver which worked fine with KX3 on my old MacBook Pro

I had the same problem with another Yaseu rig. There was one setting in the radio that I neglected to set after the reset. Found it by going through the menus and checking the manual to make sure

Did you try transmitting into a shielded dummy load?  That can often narrow down the RF-in-the-shack issue.

Hi everyone. My Yaesu FT-991A has stopped transmitting using FT8. I have had this problem a few times but it was always cured by doing a full factory reset of the radio. This time that has not

I am trying to get wsjtx to run on a new iMac using Monterey OS and M chip and a Yaesu FT991 transceiver. I am confused about whether I need SiLab drivers or not. I've searched Google and watched

Thats what I thought. I tried last nite but on 2 meters but I think I had the wrong freq. Tnx Peter. -- Thanks 73's de NU4N/Dave

I always use WSJT-x, if you look at the info on bottom left of pskreporter it often shows the application being used [cid:image001.png@...] Peter M0PWX M0PWX Grabber Page

*FB on the PSK reporter Petter. I noticed some on 2 and 6. My question are they using WSJT-X or some other program?* *73's de NU4N Dave * -- Thanks 73's de NU4N/Dave

Use PSK reporter and set it to look for anyone using MSK144 in the last couple of hours, their won’t be many, see preconfigured link below Display Reception Reports

That article looks like a website designed in the 1990s with the god-awful flashing and colors makes it almost impossible to read.! Roy WA0YMH

Found this.. Should help: https://www.qsl.net/g0isw/g0iswms.htm

.380 seems to be the most frequent. I2OIM

No.. Just North America. Not sure of other regions.

Region 1, too?

Two popular bands: Six meters 50.260 Two meters 144.150 Also some on 220 and 432... But not for the feint of heart.

Made two MSK144 scatter contacts this morning on 2 meters with my IC-9700. One was a new station/grid. 73 de Jim VE4CY

I assume 6 m. 73 Reino OH3mA

known issues last working versions 2.5.2 is OK with level control saw on wsjt io group it is Qt version problem... needs to be recompiled guess they will do it

This is KNOWN issue... last version of wsjtx that works properly fro macs is 2.5.2 saw on wsjt io group it is Qt version problem... needs to be recompiled guess they will do it

Mike, Okay, so without the VS commands, using the new DLL you sent, there is a problem. When the Split is configured for rig, when changing bands from WSJT-x, VFO A is changing but VFO B stays