does the 1000mp have a menu with the option of input from microphone or rear connector?? Dave Garber VE3WEJ / VE3IE

Thanks Mike I'll give this a try. -- Jim K2QB

#1 Unplug the Signalink#2 Uninstall the USB Audio CODEC#3 Shut down #4 Plug Signalink back in#5 Boot#6 Check audio settings in WSJT-X and sound card settings in sound card control panel for 0dB level

Sounds like he’s on the wrong frequency if he’s outputting power. Maybe he’s in Lower Side Band mode? 73, Willie N1JBJ

Trying to get a fellow ham on FT8 and for the life of me can't figure this one out. I have been running both WJST-X and JTDX for several years, so I am very aware of all the little nuances like USB

Problem solved I got this message and followed the instructions I suspect you are not selecting the correct serial port device for CAT in WSJT-X. Your screen capture shows "USB", that is definitely

I asked how to correct hamlib error on this group and on the WSJT-x facebook group and Brian Totten, shared this link with me

Where is the location of the qsos you made in WSJT-X? After a lot of trial and error I made several qsos that I logged. I want to export the list of qsos onto XMLog. Evan KB2AMY Windows

Thanks Mike, I will give it a try tomorrow. I have downloaded the file, which went just fine. 73 de Phil GU0SUP

Success. When I had version 2.5.4 installed although I couldn't get it to connect to my rig I was able to get the schedule window up briefly and enter what I wanted - 40m and 20m simultaneously on

Yes, 1x1 call signs, such as the one I am currently working with, N1D. I have several queries about this posted on WSPR-related forums, and I surmise it may simply turn out to be a flaw in the

The WSJT-X_RigControl.log file is an empty text file I created. I also gave the wsjtx_log_config.ini file the chance to create the log file. I tried both ways. WSJT-X_RigControl.log that I

I guess I should have added - are you talking about special event 1x1 callsigns? Ron - KJ5XX

That file would go in AppData/Local/WSJT-X Mike W9MDB

Placed the wsjx_log_config.ini file from downloaded from drop box into both folders. It did not generate the log file or fill the log file I then created myself and placed in the ~<me>/appdat/local

I kinda thought he was talking about N1D, as per the first line of his original missive... 73, Willie N1JBJ

What do you mean by a "three letter callsign". Are you talking about a 1 by three or a two by three such as: K5OXM or KL7ETX? An example would be helpful. Ron - KJ5XX

Actually, according to https://www.codeproject.com/Articles/1200310/Creating-WSPR-Message-in-Cplusplus you can prepend a space, noting that the third character must be numeric. I hope that's not just

"gareth.pale" <gareth.paley@...> wrote: Which hamlib version are you using Gareth? The 4.5~git version has had a lot of changes, so if you can try the current git version in place of whatever

I'm trying to operate a WSPR beacon for a special event station (N1D). It appears that the decoder in WSJT-x does not accept the use of a three letter call sign. The only spots I am getting are from