Any particular reason you're using OmniRig? FLRig doesn't have these problems but perhaps you have some other software dependent on OmniRig? de Mike W9MDB

Hi Bill and Uwe Thanks for your assistance. Settings here were as follows: OmniRig 2.0, single rig, 38400 bps, no other OmniRig clients running except WSJT-X. Uninstalled OmniRig 2.0 and went back to

I think that's possibly why the 991/991A have 4800 as the default setting. 73 Bruce VK2RT Sent from my Samsung Galaxy smartphone.

Markus, I had similar problems here with my FT-991 connected via OmniRig. Was using 38400 baud rate so far, and lots of rig control errors. My observation: Going down with baud rate to 9600 and there

All is well so far with wsjtx-2.1.0-rc7-win32 running Windows 7 with JTAlertX 2.13.7 and Log4OM to Yaesu FTdx500MP. Now if you could just beef up the propagation. 73, Herb WB8ASI

Hi Markus, which version of Omni-Rig are you using? What are the other clients of Omni-Rig and does shutting them down make any difference? Can you try setting a lower baud rate on the rig and in

After running first (receive-only) tests, here is my feedback: - running Win10 1903 Pro x64, Elecraft K3 connected via OmniRig - same configuration was running fine with 2.0 and 2.1.0-rc5 - Frequent

It's the wsjtx_log.adi file causing the problem. Bill already came up with a workaround. #1 Rename it #2 Start WSJT-X #3 Rename it back #4 File/SettingsColors -- click Rescan ADIF Log You have to do

It's been taken down due some rather severe bugs that are being fixed. de Mike W9MDB

This release seem to be no longer available. Neither 32 or 64 bit versions are showing Not Found. Tony G4CJC

Wolfgang Thank-you. I would never have figured that out on my own. I can confirm that your solution works perfectly. The Yahoo WSJT group is reporting that almost everyone is having this problem

Hi all, You are rc6 ? Is new, ? 73 de laurent on2vhf

Gary, either you start WSJT-X rc6 with a WSJT-X.exe --rig-name=xxx (replace the 'xx' with whatever you like, or rename the \Appdata\Local\WSJT-X directory. Third option - wait for rc7 There is a bug

Hello, I was continuously getting this message and being unsubscribed daily from my groups.io mailing lists as I use a hotmail address. Each time I re-subscribed with the link in the email and I also

Thanks, got it. Bill K2WH

Hi Bill, Uncheck "Menu->View->Astronomical data". The same information is here in the WSJT-X User

I clicked on "Echo" mode just out of curiosity and I cannot close the "Astronomical Data" window. It now comes up every time I start WSJT-x and is quite annoying now. How do I get rid of it

Just downloaded the latest version of WSJT-X and installed it on my Win7 32 bit desktop PC, but can't get it to run. I have tried installing it to the default directory and also to a separate c\WSJTX

Hi all, Please info procedure for change log, too adif format ? 73 de laurent on2vhf

Thanks Bill. I don't think I had on "Prompt to Log". I thought WSJT logged automatically. Not so. FYI, I printed out the QSOs from ALL.TXT. Altered my computer clock and typed the QSOs back into WSJT.