Hi Ron, Most tuners do not really like being in automatic tune more on full power. I know my MFJ tuner controlled by my IC7300 doesnt. So I have to semi-auto tune it with 10W when I change bands. I

My FT991A was Intermittently shutting down. When WSJT keyed it, it would reset. I checked my power supply and power cables and all was well. What I found was, apparently the antenna tuner does not

Tnx Cliff for the info about the heating problem. I bet that is the basis of my issues. That would explain the erratic operation, etc. It has been very frustrating. I’ve used multiple shielded

That's a "band-aid." The proper solution is grounding and bonding. See N0AX's ARRL book on the topic, to which I contributed, and/or these slides for tutorial talks I've done at Visalia, Pacificon,

Including any HDMI ports? Larry / W1DYJ

By the way Mike. I have another PC in the shack running two VirtualBox virtual machines. Both Linux Debian OS (one runs my Home Assistant smart home devices and the other runs an ad blocker called

I do have all power settings as well as settings in Device Manger set to never turn off. And I am still on Windows 10.Sent from my T-Mobile 5G Device

Have you turned off all sleep stuff in the USB devices and USB Hubs listed in Device Manager? Are you on Windows 11?  I've had quite a few problems lately with audio drivers not working all of a

Mike,I have addressed the RFI  topic previously,  but let me address it again. The error is occurring when I am not transmitting and have not been transmitting.So that eliminates RFI, other than any

I've been using WSJT-X version 2.4.0 successfully along with JT Alert for WSJT-X version 2.5.9.0 with no issues for quite a while on my FT-991A, but I have found in long transmit digital modes the

That sounds like RFI in the shack....notorious on USB devices and is band and power sensitive.You should find that if you turn power way down the problem goes away.Chokes on ALL wires -- USB cables,

I have further information on this issue, and I am interested in any feedback from others who are having intermittent errors regarding "Error in sound input". If you are also receiving this error, I

are you logging directly from WSJT-X or from JTAlert? I converted my HRD database to mariaDB for the same reason as you and log through JTAlert. I just had to tell JTAlert the details of the new

Hi Joel, First of all WSJT-X does not send more than "CQ W0GMV EM28", the rest is locally generated information. You can see what is actually sent on yellow TX messages, if you have "Tx messages to Rx

Marv, WSPR spots are uploaded to WSPR.net if you check "Upload spots" checkbox... 73's de Kari, oh2gqc

I have 1.20 and it shows occasionally on the use of the 590sg. But not on flex with log4om sent via LG hand held device

That was a big help Michael, thanks ever so much and have a great day. Regards, Lee Asher Regular Aussie Virus Updates at Aussie CV-Vaccine Informer <https://OZPandemic.info> yahoo.com@groups.io>

Read section 3.1 of the Manual. Mike W9DMB

I have HRD Logbook v6.7.0.391 and changed the database to mariaDB because logbook was really slow. It works fine now. But WSJT-X v2.5.4 will not log to HRD logbook anymore. What settings should I

I found that every time I send CQ it's sending CQ W0GMV EM28 CQ Zone 4, How do I get that "CQ zone 4" back to just send U. S A. or nothing??????????