Tnx Mike! Some of the value here were different than the guides I used. whatever it is, it worked! Tnx very much OM 73

Thanks Paul. I have had no prob with the radio... just the connections. If you have had to return it 3 times, it is however time to change! the 7100 is great radio as well.

See if this helps https://www.dk0erf.de/data/documents/WSJT-X%20FT991.pdf Mike W9MDB

I feel your pain. I have repeatedly had the exact same problem. I redo everything and (with luc) it works, for awhile and then quits. Now my FT-991A has no output on any mode into a dummy load, so

As Reino OH3MA said in another post This was the reason and was easily corrected once I knew what I had done... Perhaps it is time to repeat the reason for that missing waterfall. There is at mid

That was indeed the reason for no waterfall. So problem solved Thanks and 73 Howard, G4CCH

Hello Charly, I have the same problem with my Yaesu FT-991 when using OmniRig 1.19. With version 1.18 everything works fine. This is the reason why I stayed with 1.18. 73 de Uwe DG2YCB

Dimension. Tnx for the reply Ron. -- Thanks 73's de NU4N/Dave

Perhaps it is time to repeat the reason for that missing waterfall. There is at mid bottom of the window a selection of Current, Cumulative, Linear Avg, Reference and Q65_Sync. The Reference was

Go to WSJT-X main screen, top menu bar, select View then click on Waterfall, you should see the Waterfall screen again… 73 de Steve, KC5NK Sent from Mail for Windows Sent: Monday, February 14,

Which time sync software are you using? Ron - KJ5XX wrote:

I didn't meant to be left unatended, just to be easy on the transceiver when conditions hasn't opened yet. 73 de Pedro, LU7DZ

Me too, FT818ND Pietro I2OIM

Howard, I saw the screencopy and noted that the freq indication also showed red. It shows wrong mode for that freq. you selected. It might have stopped wsjt from normal operation? I have no idea if

Since it’s not supposed to be an unattended mode, you probably won’t find such a thing. After you send a CQ just click on the checkbox to disable TX for a while, then re-enable it. Yeah, ugly

Hi, That's a pity. It seems that it may vary depending on the build, version and specified rig of Hamlib. -- 73, Kiyo JA9HWD 2022年2月14日(月) 18:57 Lars Berg <sm0ccm@...>:

I have “Fake it” instead of “Rig Split” and have same problem with 55Hz. I just reset it. Lars SM3CCM Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows Sent: Monday,

Hello, I have also reported that the frequency shifts by 55Hz due to the designation of Omnirig. The same phenomenon occurs with the FTdx3000, and it seems that the value for shifting the VFO-B and

Hi Alan Use of reference spectrum can be useful certainly for EME when working with signals that are right on the margin, enabling a slightly lower threshold of decoding in some circumstances. You

Reino Thanks, I had not noticed that setting, now I know what it does although I'm not sure why I'd want to use it:-) 73 Alan G4ZFQ