Grounding on both ends of wires might work -- but two electrolytic capacitors works better across the power cables at the noise generator (i.e. charger/converter).  Chokes don't do as well and aren't

Ah, the fact I've never heard of shielded cables for solar installations probably has more to do with the state of the art in low-cost installations than anything else. And putting both wires through

Willie wrote: I have a 12KW array with a single 10KW SMA inverter at my 'other' QTH, but I haven't set up my HF rig here (definitely a 2022 project!), but other than cleaning up the wire routing and

I have a 12KW array with a single 10KW SMA inverter at my 'other' QTH, but I haven't set up my HF rig here (definitely a 2022 project!), but other than cleaning up the wire routing and fastening it

hello unknown name or call- try to restore pc to the point before you installed fldigi. You did set a restore point before you installed fldigi, right? Dan KC2STA -- Dan Ziolkowski KC2STA SKCC

For FT8 I have been using a Lenovo think centre M10. Seems to work well and was £100 of e-bay, an ex cooperate device with an i5 8GB RAM and a 500GB SSD. M0JFG

Hi Guys can anybody help? I have just started to use wsjt-x to test long wire in a very convoluted configuration. It is now located in a very small attic after the housing association cut down the

FYI- Consider too what Windows11 will support. To my surprise my i-7 6700 (4 core) 32gb machine fails the upgrade requirements for windows11. Having worked for Intel a number of years I can simply

Hi All, I've been happily using WSJTX for primarily for WSPR lately for several years. I had OMNIRIG 1.19 installed and WSJTX configured to use it. I installed FLdigi and attempted to get it

Over the years, I've always tried to buy top brands of computers that were well equipped both for my business, and after retirement, for personal use. Since 1998, all of my laptops have been

CLUE:The 32 version was your pre-retirement original and you say that worked fine. I had problems similar to those you described when I installed the 2.5.3 64-bit download, updating from 2.5.2 64-bit

I've heard the same. In addition to the fact that design of those inverters that ignore EMC, the manner in which these systems are installed is a major contributor. 73, Jim K9YC

There is a problem that when using mode FT4, WSJT-X disables the ability to use RRR. As explained in one of the previous emails, even during a single QSO, the signalvariance within that short time

Mike, I like that idea of reverting to RRR on weak signals. Then after the Log QSO, it can go back to RR73. Maybe it might happen someday. -- 73's George - WB5JJJ Hamshack Holine #4969

Did you try a power cycle? I've had several different RS-232 interfaces lock up and reboots did not fix the problem, but powering off both ends solved it. It was a rare occurrence. 73 de KM4RL Bob

I fixed it by changing the graph settings... Thanks Pietro for your suggestion HNY! Mike Mike Goode VK3BDL/VK3QK 42 Fourth St Black Rock VIC 3193 041 222 1649

Hi Kari, I changed the graph settings and "Voila" it works! Thank you... Happy New Year! Mike Mike Goode VK3BDL/VK3QK 42 Fourth St Black Rock VIC 3193 041 222 1649

I seem to remember that the systems which use a separate inverter for each panel, tends to be noisier than the ones that just have a single inverter and all of the panels are wired to that one

2 answers here. Shotgun, NOT RECCOMENDED, or move to the country, Highly recommended but expensive to do. Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb

S, Yes, log on to your LOTW account and click on "awards". 73 de W1EL, Eric