The structure of a cluster spot, "^" delinted text, does not have facility for recording the mode, thus determining the mode is left to guessing based on frequency or by extracting from spot notes.

How on earth is the logic of declaring what mode a report is purely on the basis of frequency ever going to have any accuracy? Folks can run CW on pretty much ALL frequencies, and FT users are

Joe, I agree that the RBN can be pretty "brain dead", but I'm having trouble swallowing the idea that a CW-decoding system is somehow locking onto and identifying an FT/x mode signal as CW. There has

The cluster networks "assume" operating mode based on frequency. They do not have sufficient "smarts" to differentiate between modes when the SPOTTER does not include the MODE in the comments. IOW,

Your problem is the opposite of mine. I've tried for years to not see CW spots, but could not achieve that with 100% accuracy. I believe spotting networks determine mode by frequency, so the mode

I have noticed that many reports submitted to the spotting networks have incorrectly categorized FT/x mode signals as CW. Is there any hope of preventing this frequent mistake and quieting down the

Are you sure he's not using the 'free text' area to send his CQ ??   That's limited to 13 characters, and that is where you get the cut off. Neil, KN3ILZ

IIRC, F/H does not support non-standard calls. 73, ... Joe, W4TV

Hello, today I trying to have a QSO with TX60CNES in FH mode on 15m but I think there are some problems in WSJT-X 2.5.2 I don't know if they are present also in 2.5.3, I'm using 2.5.2 due to problem

I switched to the 32-bit version due to the call letters with ac / crashing the 64-bit. The LoTW is working for download now. Just waiting to see if Worked is functioning yet. Kind of killing two

Thanks Mike for the status update !!! John R. Petrocelli - WA2HIP ¶¶¶¶¶¶¶¶¶¶ Primary Home Page: http://wa2hip.com -- This email has been checked for viruses by Avast antivirus

It has been fixed for the next release. Mike W9MDB

Hello,     I saw today a similar issue with a callsign in the format "xxxxx/9" today.     I saw a post here in the last couple of days about crashing with "slashed callsigns".     Rather

Same thing on my M1 Mac mini started out with them slider at the bottom and it powered up full power. Top is 0 bottom is 100% reinstalled current version ok. Les

Thank you for posting this...mine crashed at the moment it tried to log W2/JR1AQN and required a restart of the computer to restart the application. I ran the new version all afternoon with no

Thank you for posting the fix..I had the same problem. W2/JR1AQN crashed the program when it went to log the QSO. I had to restart the computer to start the program again. No problems running the new

Hi Guys, Hope someone can point me in the right direction. I have an IC7610 running RS-BA1 V2. I have been using it for more than a year with SSB and CW with good success. I am trying to get FT-8

Hi OM's I just mentioned problems on EU access to web server on Princeton on SourceForge

I eventually upgraded to v2.5.2 and it works well with Windows 11, Quisk and a Hermes Lite 2 SDR TCVR. 73 - Pierre - FK8IH

I eventually upgraded to v2.5.2 and it works well with Windows 11, Quisk and a Hermes Lite 2 SDR TCVR. 73 - Pierre - FK8IH