for who is interested on this topic: just done some troubleshooting ... RECAP working settings: wsjtx 2.4.0 (it use Hamlib 4.2) -> set CAT for FT817 or FT847 wsjtx 2.5.0rc5 (it use Hamlib 4.3) ->

On 02/11/2021 20:20, Karl Beckman WA8NVW - AFA5VB wrote: Karl, that is not a correct assessment, many users of many different rigs use a simple serial port driven PTT switch

Stefan: The Kenwood TS-2000 is indeed a bit peculiar regarding use of the rear panel 13-pin DIN J7 accessory connector for data interfaces. If you are sending USB sound card audio to the rear

I finally figured it out. Thanks for the reply On 11/2/2021 2:01 PM, Bill Somerville wrote: -- Thanks 73's de NU4N/Dave

Dave, the WSJT-X User Guide is always a good place to start when you need to find out how to do

How do i add 60 meters to WSJT-X ? I know it's under frequencies but I forgot how to add a new frequency. -- Thanks 73's de NU4N/Dave

Hi Goran, thanks for the test with the latest Hamlib DLL and the further details. So I can see what is happening put the attached file into your WSJT-X configuration files directory (on MS Windows

Hi Bill, Thanks for your advice. I am running Windows 10PRO 64 Bits. Version 21H1. OS-version 19043.1288. Interface is Yaesu USB Digimode from xggcomms. I followed your instructions. Replaced the

+1. FLRig is the way to go for Xiegu IMO....I'd bet the Xiegu G1 will also connect in similar fashion as G90 to FLRig for rig control. I suggest giving that a try...get it connected to your Xiegu

Hi Yes I have tried flrig, it is available for Mac (but a “windowy GUI). I fiddled around a bit then gave up. Maybe I should try again… Thanks for your input 73 Antony M0IFA

Hi Goran, before I start asking to run diagnostic tests there is one more thing to try if you are running MS Windows. Download the latest Hamlib DLL that matches your installed WSJT-X architecture

Another example on 40m. 26 Spots in ALL_WSPR.txt 211102 1506 -30 -0.10 7.0399895 PA2HGJ JO22 10 -1 0.15 1 1 0 0 27 212 -95 211102 1506 -6 0.24 7.0400087 G4GCI IO90 37

I had a similar problem with my G90. I ended up using flrig to handle cat control. Flrig has the g90 on the list of rigs, and it might be a usable substitute if your rig isn’t on the list. . . if

Hi Bill, Yes, I just installed v2.5.1. Same problem. Frequency window returns to 1,840 after 2 sec (Pull intervall). CAT button is green indicating CAT is OK. As I wrote, v2.3 and earlier versions

5357

Bill, Thanks for your reply! Simply as I hope I can: My WSPR hops around correctly and receives, never transmits even with <Tx Pct 100%>. Dean

What is the freq for 60 m FT8?? -- Thanks 73's de NU4N/Dave

I started with live decode performance testing (Band hopping) using WSJT-X 2.51 on the Pi Zero 2. I ran into an issue where Spots don't get uploaded to wsprnet. It seems to happen when large amounts

Working on Receive, no TX.

On 02/11/2021 13:31, AJ4EO wrote: Hi Dean, I'm not sure I understand the issue you are reporting, your subject line says band-hopping is working but Tx is not, but the body of