A WSJTX related compatibility question. I’ve been running WSJTX integrated with N1MM for several years. A friend said I should look at using GridTracker. I download/installed GridTracker and tried

The freedv problem had to do with defaulting to VFOA which has been fixed. Mike W9MDB On Tuesday, October

"Bill Somerville" <g4wjs@...> wrote: OK, that's fair enough. Clearly other software does it differently, changing from hamlib 4.2 to hamlib 4.3 upset freedv in this regard so I thought it

Hi Sheamus, what options do you have set in the WSJT-X "Settings->Radio" panel? Are you sure that interface gives you CAT control, or is it just PTT unsig RTS or DTR on a serial port

On 26/10/2021 19:39, Brian Morrison wrote: Brian, WSJT-X does not use the Hamlib rig model numbers to save the rig being used, the description is used. 73 Bill

Hi Bob, OK, now I understand your query. Have you checked the "Settings->General->Show DXCC, grid, and worked-before status" option in WSJT-X? See the WSJT-X User Guide for more

"S.Ryan" <seamieryan@...> wrote: You could check that the WSJTX settings are still selecting a TS2000, it could be that the rig model number used by hamlib has changed. -- Brian G8SEZ

Good afternoon Bob, So far I have not seen anyone suggest doing anything about resetting the colors in WSJT-X. From WSJT-X, 1. Go to the File drop

I deleted the wsjtx_log.adi file and still no colors show except for green on CQ is msg (which is selected). I have selected a number of colors boxes and did restart the program after deleting the log

Hello Mike, Unfortunately that didn't do anything for the problem at all.. I'm baffled by this, do you think the interface I'm using for CAT control is gone too old and incompatible? I can't see how

Bob, I use a free program that removes every remnant, all files, registry entries, anything that's usually left over after uninstalling whichever program you choose and it has done a great job

And is the driver installed for tbst chip to usb device sent via LG hand held device

And what are you using for cat control sent via LG hand held device

Download 2.5.1 and replace the hamlib-4.dll in the wsjtx\bin directory with the one from the W32 or W64 hamlib zip file as appropriate for the WSJTX version you have from here

Is anyone having a problem with the newer versions of WSJTX? I just upgraded from v2.2 to v2.5.1, only now it won't key down the PTT line of my Kenwood TS2000. So I reverted back, and it works again!

Use JTAlert which has a very flexible colour management system. It is free and links nicely into WSJT-X. Colours are for stations being decoded so no idea why you would want to delete your old logs as

Thank you for your answer. I did what you suggested but no luck. The program still - somewhere - has all my previous QSO's, all of which I want to delete. It's very strange. My objective here is to

I’ve found that I can use the SDR with a dummy source (50 ohm) or even open-circuit and it does not get overdriven. Alternatively transmit into a dummy load and a small whip is enough to sample the

OM, I'm not sure I understand your requirement, the purpose of the WSJT-X log file is to record QSOs, unless you did not make the QSOs in your WSJT-X log file, i.e. they were all some sort of test 

>EVERYONE should check their output to see what they are actually sending. Two additional options: There are RF tap devices that draw off a measurable sample of transmitted RF. Check eBay. Get a $30