Just put in a patch that should re-use the existing filter if RIG_PASSBAND_NOCHANGE is requested. So at least once a filter is selected it should stick. Mike W9MDB

Hi Joe Thank you for your reply. Linrad is set up to send tf2 at 96000 to the network. Any thoughts on why my MAP65 installation only receives starting at the zero second to second six, does a decode

Of course. Thanks, Bill, both for your quick reply and your patience! 73, Joe N0NOW

Joe, the WSJT-X User Guide has the answer to your query: https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.5.0.html#DOWNLOAD_SAMPLES 73 Bill G4WJS.

I'm running WSJT-X 2.4.0 (on Ubuntu linux), installed as a update a year or so ago. I have a neighbor running v. 2.5 on a Mac, also a recent update. Both of us are curious about FST4. We are

Mike, WSJT-X always requests a mode change with no change in the filter settings. I know this is somewhat problematic with some Icom rigs that do not allow reading the

I've gone back and forth with Icom several times.... Their default mode is filter 2 and I used to force it to filter 1. I changed hamlib to let the rig default to whatever it wants and if Icom ever

Hi Bill, I sent a few minutes ago but it must have gone to cyberspace so I'll try again I added the dll to ver25 and it does startup data mode (great) however the filter is changed to #2 position

Hi Ian, Behavior of the MAP65 files that you describe is exactly as it should be. Xpol data files have extension .tf2 and are opened when Xpol is selected. Single-polarization files are half as big,

Hi Bill, well just about there. the usb-d mode is now selected going into wsjtx however the rig is put into filter 2 which really narrows the field of view additionally it leaves the USB mode in

Perhaps it was GridTracker. 73, Reino OH3mA

Hi Andy, if that is on MS Windows then you probably mean JTAlert. 73 Bill G4WJS.

You thinking of JTAlert? https://hamapps.com/ Mike W9MDB

I've been away from FT8 for a long time. Besides WSJT-x, I remember a program that showed callsigns in a grid that ran at the same time -- but I can't remember the name of the program. Can you give

Hi Bill Checked the configuration several times all seems good. Did an uninstall and a fresh download and copied the demo files. The first is an iq type file of 19 MB and can only be selected if x pol

Thanks for that tip Bill, works like a charm. 73, Bernd - KB7AK

I have a source for an MS beacon that generates MSK144 directly at 50MHz by programming a DDS chip. It is straightforward to generate the modulation, switching between two RF 'tones' exactly 1000Hz

Typically what I do, is try and find a clear timeslot and park there. I don't shift to the operators frequency I'm responding to because I'm scared I'll step on someone who is using the same frequency

Hi Bob, this has been confirmed as a Hamlib regression which has recently been repaired, as you are on Windows you can try using an updated Hamlib DLL. Try putting the libhamlib-4.dll from the bin

thanks Bill, the file is on the way Bob VE3CGA