Hi Reg, To me it looks like you have a notch filter set to 2 kHz. I'm not saying that you have, but that's what it looks like. 73 Mike G0LQI

You hit the nail on the head Charlie. 73. Carl - WC4H

Hi, Trying to set up WSJT-X in combination with Omni-Rig. RX works as expected and the FT-897 is responding correctly. But at TX, the freq. display turns red and showing 0,0000. It is just the diplay

I have noticed that some stations are reported as CW in my ve7cc cluster, when clearly they are in a Digital mode by the frequency displayed. I wonder why that is? Neil N4FN

And you do it again. And again as necessary until you or your partner decide to quit the qso. 73 Phil GM3ZZA -- 73 Phil GM3ZZA

I have a TS870 with WSJT-X with no problems operating for over 2 years. Well working the recent dxpeditions over the last few days i have on occasion used fox /hound mode.This has always been returned

Hey Bill!! THANKS. Just added two new countries on 12m AFTER I disabled the RR73 What I saw was me repeating RRR and after 3 to 6 times THEY replied with the 73 and my program logged it. No wonder

Hello Bill Somerville: Sunday, October 10, 2021, 11:59:38 AM, you chiseled out: Hello Bill. Thanks for taking the time. Welllll ...I have no a'priori knowledge that he isn't going to decode the

Hello Philip Rose via groups.io: Sunday, October 10, 2021, 12:04:27 PM, you chiseled out: yes sir, it does. And for ONE-Time ONLY then I have to reposition the active TX# -- Best regards, Bob

Bob, If you reenable TX after sending RR73, the program should recognise that the QSO partner repeated R+rpt and so send RR73 again. At least it does for me. 73 Phil. Sent from Mail for

Bob, if your QSO partners are regularly not copying your RR73 messages then you shouldn't be sending RR73 in the first place. Double-click the Tx 4 message to switch it to the RRR format message and

Hello WSJT-X List So, these past few days, 12m has been SUPER into EU, Balkans,Adriatic, Southern Med. Many many times, the other chap hasn't been able to decode my RR73. So She/He keeps sending

Bob I think you have missed the point here, the software does it’s own thing regardless, no interference needed. The issue is that some stations who are not using the ‘Hold Frequency’ feature

I set my WSJT-X software for FAKE IT or SPLIT to control the K3S radio. It really makes no difference in my case. When I answer a CQ, I double click on the calling station and let the software do

Hi Amos, see point 11 in the "Detailed Instructions for Hounds" section in this document: https://physics.princeton.edu/pulsar/k1jt/FT8_DXpedition_Mode.pdf I is intended and designed to try an

FT8 Fox and Hound have become very popular lately but it has a problem: My calls for J5HKT yesterday and today on 7,10, 18 Mhz does last about 2.5 minutes. Enable Tx becomes Halt Tx. This in in

OK, after fighting this for days, I finally grabbed a ferrite and wrapped my USB cable (never had an issue with this cable with previous setups) just in case this was an RFI

Hi JJ, your expectations should not be any different from the examples given in the WSJT-X User

While calling CQ, If a station responds thru the conversation, if he sends me a 73, my software disengages the ENABLE button and resets. See image of QSO. This doesn't happen when I'm calling someone

Yeah, I jumped through all the RealTek hoops; disabled the rt devices in device manager, disabled driver updates, even booted into safe mode and moved the rt drivers out of the way. Bill says that